Switch signal

Type name Description Note
LC-BEG IR-PD-E
Remote control and programming tool
Infra-red remote control for the control of LC-BEG-PD4 sensors.  Installation aid and programming tool. Four predefined brightness values for the switch-on value of the lighting; selection completely or semi-automatic; predefined switch-on times of the lighting: pulse, 15 s to 30 min.; predefined switch-on times for device control: pulse, 5 to 120 min.; saving of the current dimming value as switch-on and/or switch-off value; permanent anti-sabotage protection; range up to a max. of MH=8m. Wall mount included in scope of delivery.
A light/presence sensor (LC-BEG PD4-M-DALI-xx) is also required for operation of the control system.
LC-BEG IR-RC
Remote control and programming adapter for smart phones
IR-RC adapter to operate all remote-controllable LC-BEG sensors, for connection to the audio output of smart phones, Luxomat remote control app needed, can be downloaded from the app store for iOS and Android, incl. micro USB charging cable.
LC-BEG PD4-M-1C-AP
Light/presence sensor for ceiling surface mounting
Presence detector, with circular and long-range monitoring area, 1 switching channel for switching light (potential-free); high-performance relay for switching high lamp outputs; any number of slave devices for low-cost extension of the monitoring area can be connected; settings manual and via remote control; monitoring area see table, lateral Ø 24.0 m, frontal Ø 8.0 m; 1 channel (light control); switching power 2300 W, cosφ=1; 1150 VA; cosφ=0.5 time setting 15 sec.-30 min. or pulse; brightness value 10-2000 lx.
A remote control (LC-BEG IR-PD) is also needed to operate the control system. The reception range can be upgraded with LC-BEG PD4-S-AP. Ball protection cage and IP54 holder (optional).
LC-BEG PD4-S-AP
Slave sensor presence for ceiling surface mounting
Presence sensor, slave sensor with circular and long-range monitoring area, surface mounting, for master/slave combination. Only one master for light switching is necessary; motion detection in all areas of the room possible with slave sensors; switching pulse to the master in the case of detected movement; recognition of the motion independent of ambient lighting; sensor and power part in the same housing; range area see table.
A master sensor (LC-BEG PD4-M-AP) is also needed to operate the control system. Ball protection cage and IP54 holder (optional).
CHARACTERISTICS
Category Control accessories electrical engineering
Type LC-BEG IR-PD-E
Order number 84506027100
EAN-number 4020863331093
Commodity code 85176200
Certification mark IP 20, Indoor, CE
MECHANICS
Dimensions LxWxH/DxH 80 x 60 x 8 mm
Weight (net) 0.036 kg
Mounting method mobile/remote control
Remote control and programming tool
Infra-red remote control for the control of LC-BEG-PD4 sensors.  Installation aid and programming tool. Four predefined brightness values for the switch-on value of the lighting; selection completely or semi-automatic; predefined switch-on times of the lighting: pulse, 15 s to 30 min.; predefined switch-on times for device control: pulse, 5 to 120 min.; saving of the current dimming value as switch-on and/or switch-off value; permanent anti-sabotage protection; range up to a max. of MH=8m. Wall mount included in scope of delivery. A light/presence sensor (LC-BEG PD4-M-DALI-xx) is also required for operation of the control system.

Dimensions LxWxH/DxH (mm): 80 x 60 x 8
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: LC-BEG IR-PD-E
Article number: 84506027100
Product deep link: https://www.regiolux.de/en/article/84506027100
Cross-section/longitudinal section | (Q+L/LL)
Cross-section/longitudinal section | (Q+L/LL)
Dimensions
L 80 mm Length
B 60 mm Width
H 8 mm Height

Accessories for:

CHARACTERISTICS
Category Control accessories electrical engineering
Type LC-BEG IR-RC
Order number 84506021100
EAN-number 4020863318711
Commodity code 85176200
Certification mark IP 20, CE
MECHANICS
Dimensions LxWxH/DxH 80 x 60 x 8 mm
Weight (net) 0.036 kg


Dimensions LxWxH/DxH (mm): 80 x 60 x 8
Certification mark: IP 20, CE

Regiolux GmbH
Type: LC-BEG IR-RC
Article number: 84506021100
Product deep link: https://www.regiolux.de/en/article/84506021100

Accessories for:

CHARACTERISTICS
Category Control unit+sensor
Type LC-BEG PD4-M-1C-AP
Order number 84506001100
EAN-number 4020863269785
Commodity code 90328900
Certification mark IP 20, Protection class II, CE
ELECTRICAL ENGINEERING
Mains voltage 230 V / 50 Hz
MECHANICS
Dimensions LxWxH/DxH 98 x 65 mm
Weight (net) 0.162 kg
Mounting method Surface single mounting
Light/presence sensor for ceiling surface mounting
Presence detector, with circular and long-range monitoring area, 1 switching channel for switching light (potential-free); high-performance relay for switching high lamp outputs; any number of slave devices for low-cost extension of the monitoring area can be connected; settings manual and via remote control; monitoring area see table, lateral Ø 24.0 m, frontal Ø 8.0 m; 1 channel (light control); switching power 2300 W, cosφ=1; 1150 VA; cosφ=0.5 time setting 15 sec.-30 min. or pulse; brightness value 10-2000 lx. A remote control (LC-BEG IR-PD) is also needed to operate the control system. The reception range can be upgraded with LC-BEG PD4-S-AP. Ball protection cage and IP54 holder (optional).

Dimensions LxWxH/DxH (mm): 98 x 65
Certification mark: IP 20, Protection class II, CE

Regiolux GmbH
Type: LC-BEG PD4-M-1C-AP
Article number: 84506001100
Product deep link: https://www.regiolux.de/en/article/84506001100
Cross-section/longitudinal section | (Q+L/LL)
Cross-section/longitudinal section | (Q+L/LL)
Dimensions
H 65 mm Height
D 98 mm Diameter of the luminaire

Accessories for:


Accessories

CHARACTERISTICS
Category Control unit+sensor
Type LC-BEG PD4-S-AP
Order number 84506005100
EAN-number 4020863269914
Commodity code 90328900
Certification mark IP 54, Protection class II, Indoor, CE
ELECTRICAL ENGINEERING
Mains voltage 230 V / 50 Hz
MECHANICS
Dimensions LxWxH/DxH 101 x 76 mm
Weight (net) 0.202 kg
Mounting method Surface single mounting
Slave sensor presence for ceiling surface mounting
Presence sensor, slave sensor with circular and long-range monitoring area, surface mounting, for master/slave combination. Only one master for light switching is necessary; motion detection in all areas of the room possible with slave sensors; switching pulse to the master in the case of detected movement; recognition of the motion independent of ambient lighting; sensor and power part in the same housing; range area see table. A master sensor (LC-BEG PD4-M-AP) is also needed to operate the control system. Ball protection cage and IP54 holder (optional).

Dimensions LxWxH/DxH (mm): 101 x 76
Certification mark: IP 54, Protection class II, Indoor, CE

Regiolux GmbH
Type: LC-BEG PD4-S-AP
Article number: 84506005100
Product deep link: https://www.regiolux.de/en/article/84506005100
Cross-section/longitudinal section | (Q+L/LL)
Cross-section/longitudinal section | (Q+L/LL)
Dimensions
H 76 mm Height
D 101 mm Diameter of the luminaire

Accessories for:


Accessories


Similar products

Regiolux News – always up-to-date