Start enquiry
maran-DV/1200
maran – simply convincing
Moisture-proof lamps are often used in a rough environment. In addition to dirt and dust, problems are also caused by moisture or splashwater of course. However, there are often additional requirements. Examples include operating sites with a high fire risk or mechanical loads, e.g. in the case of construction site lighting. It's good to use luminaires such as maran in these cases. – They can cope with anything.
|
|
|
|
|
|
|---|---|---|---|---|
| maran-DV/1200 Opal diffuser direct/indirect distribution | ||||
|
maran-DV/1200
|
LED 4800 840
|
hg
|
DALI
|
|
maran-DV/1200LED 4800 840hgDALI
| CHARACTERISTICS | |
|---|---|
| Category | Luminaire with a higher protection rating IP65 |
| Type | maran-DV/1200 LED 4800 840 DALI hg |
| Order number | 50132406615 |
| EAN number | 4020863466160 |
| Commodity code | 94051140 |
| Certification mark | IP 65, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE |
| Impact resistance (IK rating) | IK08 (-20°C bis 35°C) |
| Ambient temperatur | ta -20°C to 35°C |
| Special properties | Ready for IoT |
| Warranty period | 5 years |
| State funding programs | BEG - Federal funding for efficient buildings (valid only for Germany) |
| ELECTRICAL ENGINEERING | |
|---|---|
| Controller | Electronic driver DALI (1 pcs.) |
| Wiring | 5x1.5mm², throughwired, plug-in contact for 5x1.5qmm |
| System output | 33W |
| Mains voltage | 230V/50Hz |
| Circuit breakers (inrush current) | 17 pieces/B10 27 pieces/B16 28 pieces/C10 45 pieces/C16 |
| Energy efficiency class/light source | C |
| LIGHTING TECHNOLOGY | |
|---|---|
| Placement | LED, Colour rendering/Light colour CRI ≥ 80 / 4000K |
| Colour tolerance (MacAdam) | 4SDCM |
| Photobiological safety (Luminaire) | RG1 |
| Nominal luminous flux | 4763lm |
| LED service life | 50000h L70/B10 (Tq 35°C), 50000h L80/B50 (Tq 25°C) |
| Luminaire luminous efficiency | 145lm/W |
| UGR lat./long. | 24.2 / 23.5 |
| MECHANICS | |
|---|---|
| Housing colour | light grey |
| Dimensions (LxWxH/DxH) | 1240mm x 85mm x 78mm |
| Weight (net) | 1.68kg |
| Cable entry KE | Further cable entries can be broken out at the end face and on the rear |
| Type of installation | Ceiling-mounted single installation, Pendant individual mounting, Wall mounting, Mounting rail installation |
Downloads
Product datasheet
Tender text
Mounting instructions
Product pictures
Relux ROLFZ file
EULUMDAT file
IES file
BIM RFA file
Certificate
Light calculation
more info about "maran"
Tender text
Luminaire with a higher protection rating IP65; Ceiling-wall and pendant mounting; Housing made of polycarbonate, captive diffuser fastening clips made of stainless steel, cable entries with cable gland M20 in accordance with the protection rating on the end faces, suspension wires to make installation easier; Housing colour light grey; Deep-drawn polycarbonate diffuser with opal-prismatic, smooth surface. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Integrated driver. Electrical connection via 5-pole connection terminal with plug-in contacts. Through-wired. 2 variable fastening clips of stainless steel and suspension bracket for luminaire mounting also included in the scope of delivery. Swivel mounting bracket SBB to be ordered separately. chamfered cable entries for boring on the top of the luminaire;
Dimensions (LxWxH/DxH): 1240mm x 85mm x 78mm
Cable entry KE: Further cable entries can be broken out at the end face and on the rear
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 4SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L70/B10 (Tq 35°C), 50000h L80/B50 (Tq 25°C)
Nominal luminous flux: 4763lm
Luminaire luminous efficiency: 145lm/W
Controller: Electronic driver DALI (1 pcs.)
Wiring: 5x1.5mm², throughwired, plug-in contact for 5x1.5qmm
System output: 33W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK08 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special properties: Ready for IoT
UGR lat./long.: 24.2 / 23.5
Certification mark: IP65, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Regiolux GmbH
Type: maran-DV/1200 LED 4800 840 DALI hg
Article number: 50132406615
Product deep link: https://www.regiolux.de/en/article/50132406615
General warranty conditions: www.regiolux.de/en/Service/Warranty
Dimensions (LxWxH/DxH): 1240mm x 85mm x 78mm
Cable entry KE: Further cable entries can be broken out at the end face and on the rear
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 4SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L70/B10 (Tq 35°C), 50000h L80/B50 (Tq 25°C)
Nominal luminous flux: 4763lm
Luminaire luminous efficiency: 145lm/W
Controller: Electronic driver DALI (1 pcs.)
Wiring: 5x1.5mm², throughwired, plug-in contact for 5x1.5qmm
System output: 33W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK08 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special properties: Ready for IoT
UGR lat./long.: 24.2 / 23.5
Certification mark: IP65, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Regiolux GmbH
Type: maran-DV/1200 LED 4800 840 DALI hg
Article number: 50132406615
Product deep link: https://www.regiolux.de/en/article/50132406615
General warranty conditions: www.regiolux.de/en/Service/Warranty
Dimensional sketch
Cross-section | (Q)
Longitudinal section | (L)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
| Dimensions | ||
|---|---|---|
| L | 1240 mm | Length |
| B | 85 mm | Width |
| H | 78 mm | Height |
| A1 | 850 mm | Mounting distance single mounting |
Planning data / Photometric data
| Light technology | |
|---|---|
| Reference | LED 4800lm 840 |
| ηLB | 100 % |
| Φ ↓/↑ | 96 % / 4 % |
| UGR lat./long. | 24.2 / 23.5 |
Media data
Accessories for:
Accessories
1. ATS unwired support rail
2. SDTSV support rail connector
3. SDTE support rail protective cover (end face)
4. SDA/SDH support rail attachment / suspension
5. KK suspension (chain)
6. ATLSA luminaire attachment
7. Blank cover SDBK
2. SDTSV support rail connector
3. SDTE support rail protective cover (end face)
4. SDA/SDH support rail attachment / suspension
5. KK suspension (chain)
6. ATLSA luminaire attachment
7. Blank cover SDBK
