parsa-PSOPC/1200

A damp-proof luminaire has to be one thing above all – tough. parsa has been developed with exactly this in mind. Not only as an IP luminaire, but also for an extended temperature range from frozen environments through to areas where a great deal of process heat is produced. It goes without saying that the luminaire is well prepared for mechanical loads and quick and easy to install thanks to its well-thought-out design. The fact that there have been no compromises as far as the light engine is concerned is illustrated by the outstanding service life data. Altogeher, a real all-round product. The Housing of parsa-PSO provides an increased chemical resistance.

parsa-PSOPC/1200 Opal diffuser direct distribution impact-proof
parsa-PSOPC/1200
LED 3900 840
hg
ED
CHARACTERISTICS
Category Luminaire with a higher protection rating
Type parsa-PSOPC/1200 LED 3900 840 ET hg
Order number 56612024170
EAN number 4020863340910
Commodity code 94051140
Certification mark IP 65, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C), IK06 (35°C)
Ambient temperatur ta -20°C to 35°C
Warranty period 5 years
State funding programs BEG - Federal funding for efficient buildings (valid only for Germany)
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 31W
Mains voltage 230V/50Hz
Circuit breakers (inrush current) 11 pieces/B10
19 pieces/B16
19 pieces/C10
31 pieces/C16
Energy efficiency class/light source C
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3SDCM
Photobiological safety (Luminaire) RG0
Luminaire luminous flux 4039lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficiency 130lm/W
UGR lat./long. 24.6 / 21.3
MECHANICS
Housing colour light grey
Dimensions (LxWxH/DxH) 1300mm x 105mm x 117mm
Weight (net) 2kg
Cable entry KE (X/Y) 650mm/0mm
Type of installation Individual surface mounting, Pendant individual mounting, Wall mounting, Mounting rail installation
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, device mount made of sheet steel painted white. Housing colour light grey; Deep-drawn polycarbonate diffuser with opal, smooth surface; The light source is removable in accordance with the EU 2019/2020 ecodesign requirement and can be replaced at the factory. Integrated driver. Electrical connection via 3-pole connection terminal with plug-in contacts.. Swivel mounting bracket SBB to be ordered separately.

Dimensions (LxWxH/DxH): 1300mm x 105mm x 117mm
Cable entry KE (X/Y): 650mm/0mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG0
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux: 4039lm
Luminaire luminous efficiency: 130lm/W
Controller: Electronic driver (1 pcs.)
System output: 31W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (-20°C), IK06 (35°C)
Ambient temperatur: ta -20°C to 35°C
UGR lat./long.: 24.6 / 21.3
Certification mark: IP65, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: parsa-PSOPC/1200 LED 3900 840 ET hg
Article number: 56612024170
Product deep link: https://www.regiolux.de/en/article/56612024170
General warranty conditions: www.regiolux.de/en/Service/Warranty
Cross-section | (Q)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Dimensions
L 1300 mm Length
B 105 mm Width
H 117 mm Height
A1 800 mm Mounting distance single mounting
A3 505 mm Mounting distance between luminaires in a light run arrangement
X 650 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Reference LED 3900lm 840
ηLB 100 %
Φ ↓/↑ 87 % / 13 %
UGR lat./long. 24.6 / 21.3
LVK picture

Accessories for:


Accessories

1. ATS unwired support rail
2. SDTSV support rail connector
3. SDTE support rail protective cover (end face)
4. SDA/SDH support rail attachment / suspension
5. KK suspension (chain)
6. ATLSA luminaire attachment
7. Blank cover SDBK

Mounting rail

Spare parts


Similar products

Regiolux News – always up-to-date