cubus-RSAGHC-1200
With its rectangular cross-section, the powder-coated sheet steel housing in traffic white or white aluminium is a real purist. The end caps of same colour made of plastic with integrated light run connector are easy to detach and to replace with a suspension bracket for the mounting, with light run, which accommodates a Y-wire suspension. This saves the mounting of one suspension for each light and thus valuable working time. An additional benefit: The louvres appear seamlessly continuous. The through-wiring is quickly and simply implemented thanks to the three-pole plug-in contact connection terminals. When using the accessory for the through-wiring, even the finishing of the wire ends can be omitted. Light distribution is implemented by means of an aluminium parabolic reflector, a frosted diffuser pane is also available - but only with the LED version. The RSAGHC LED version with frosted diffuser is primarily intended for representative general lighting. Numerous variants for dimming and emergency lighting can also be implemented by means of accessories or from the factory on request.
|
|
|
|
|
|
|---|---|---|---|---|
| cubus-RSAGHC-1200 Satin-finished diffuser direct distribution | ||||
|
cubus-RSAGHC-1200
|
LED 2600 840
|
tw RAL 9016
|
ED
|
|
| CHARACTERISTICS | |
|---|---|
| Category | Pendant luminaire |
| Type | cubus-RSAGHC-1200 LED 2600 840 ET vw RAL 9016 |
| Order number | 65240014180 |
| EAN number | 4020863281343 |
| Commodity code | 94051190 |
| Certification mark | IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE |
| Impact resistance (IK rating) | IK03 |
| Ambient temperatur | ta 25°C |
| Warranty period | 5 years |
| State funding programs | BEG - Federal funding for efficient buildings (valid only for Germany) |
| ELECTRICAL ENGINEERING | |
|---|---|
| Controller | Electronic driver (1 pcs.) |
| System output | 21W |
| Mains voltage | 230V/50Hz |
| Circuit breakers (inrush current) | 19 pieces/B10 30 pieces/B16 31 pieces/C10 50 pieces/C16 |
| Energy efficiency class/light source | C |
| LIGHTING TECHNOLOGY | |
|---|---|
| Placement | LED, Colour rendering/Light colour CRI ≥ 80 / 4000K |
| Colour tolerance (MacAdam) | 3SDCM |
| Nominal luminous flux | 2553lm |
| LED service life | 50000h L80/B10 (Tq 25°C) |
| Luminaire luminous efficiency | 121lm/W |
| UGR lat./long. | 20.8 / 22.6 |
| MECHANICS | |
|---|---|
| Housing colour | traffic white RAL 9016 |
| Dimensions (LxWxH/DxH) | 1188mm x 140mm x 64mm |
| Weight (net) | 4.05kg |
| Type of installation | Pendant individual mounting, Pendant light strip mounting |
Dimensions (LxWxH/DxH): 1188mm x 140mm x 64mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 25°C)
Nominal luminous flux: 2553lm
Luminaire luminous efficiency: 121lm/W
Controller: Electronic driver (1 pcs.)
System output: 21W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03
Ambient temperatur: ta 25°C
UGR lat./long.: 20.8 / 22.6
Certification mark: IP20, Protection class I, ENEC10 VDE, F, Indoor, CE
Regiolux GmbH
Type: cubus-RSAGHC-1200 LED 2600 840 ET vw RAL 9016
Article number: 65240014180
Product deep link: https://www.regiolux.de/en/article/65240014180
General warranty conditions: www.regiolux.de/en/Service/Warranty
| Dimensions | ||
|---|---|---|
| L | 1188 mm | Length |
| B | 140 mm | Width |
| H | 64 mm | Height |
| A1 | 1076 mm | Mounting distance single mounting |
| A2 | 1126 mm | Mounting distance 1st luminaire of the light run |
| A3 | 1176 mm | Mounting distance between luminaires in a light run arrangement |
| P min | 500 mm | Minimum suspension length |
| P max | 1900 mm | Maximum suspension length |
| Light technology | |
|---|---|
| Reference | LED 2600lm 840 |
| ηLB | 100 % |
| Φ ↓/↑ | 100 % / 0 % |
| UGR lat./long. | 20.8 / 22.6 |
