cubus-RSAXHC-1200

cubus - diversity is the name of the game

With its rectangular cross-section, the powder-coated sheet steel housing in traffic white or white aluminium is a real purist. The end caps of same colour made of plastic with integrated light run connector are easy to detach and to replace with a suspension bracket for the mounting, with light run, which accommodates a Y-wire suspension. This saves the mounting of one suspension for each light and thus valuable working time. An additional benefit: The louvres appear seamlessly continuous. The through-wiring is quickly and simply implemented thanks to the three-pole plug-in contact connection terminals. When using the accessory for the through-wiring, even the finishing of the wire ends can be omitted. Light distribution is implemented by means of an aluminium parabolic reflector, a frosted diffuser pane is also available - but only with the LED version. The RSAGHC LED version with frosted diffuser is primarily intended for representative general lighting. Numerous variants for dimming and emergency lighting can also be implemented by means of accessories or from the factory on request.

cubus-RSAXHC-1200 Silky matt parabolic louvres direct distribution
cubus-RSAXHC-1200
LED 3100 840
tw RAL 9016
DALI2
cubus-RSAXHC-1200LED 3100 840tw RAL 9016DALI2
CHARACTERISTICS
Category Pendant luminaire
Type cubus-RSAXHC-1200 LED 3100 840 DALI2 vw RAL 9016
Order number 65240016660
EAN number 4020863281329
Commodity code 94051190
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
Impact resistance (IK rating) IK03
Ambient temperatur ta 25°C
Special properties Ready for IoT
Warranty period 5 years
State funding programs BEG - Federal funding for efficient buildings (valid only for Germany)
ELECTRICAL ENGINEERING
Controller Electronic driver DALI2 (1 pcs.)
System output 21W
Mains voltage 230V/50Hz
Circuit breakers (inrush current) 17 pieces/B10
28 pieces/B16
29 pieces/C10
47 pieces/C16
Energy efficiency class/light source C
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3SDCM
Nominal luminous flux 3100lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficiency 147lm/W
UGR lat./long. 15.3 / 18.9
MECHANICS
Housing colour traffic white RAL 9016
Dimensions (LxWxH/DxH) 1188mm x 140mm x 64mm
Weight (net) 4.05kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, rectangular cross-section, plastic end faces with integrated light run connectors; Housing colour traffic white RAL 9016; Direct light distribution using reflectivity-enhanced anodised aluminium parabolic louvre, silk matt, 65° < 1000 cd/m², omnidirectional glare suppression according to the current DIN EN 12464-1 standard, self-engaging, can be folded down on both sides, louvre is optically seamless for light run mounting; neutral white light colour (840) with very good colour consistency and high colour rendering Ra>80; The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Electrical connection via 5-pole connection terminal with plug-in contacts.; With changeover converter for emergency lighting operation on request. The suspension set SAYE-PS must be ordered separately for individual luminaires; the suspension set SAYE-PS must be ordered separately for the light run installation, plus one suspension bracket and one suspension SAY-DZ per luminaire joint. Complete height-adjustable suspension set with a canopy and integrated light control available separately as accessories.

Dimensions (LxWxH/DxH): 1188mm x 140mm x 64mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 25°C)
Nominal luminous flux: 3100lm
Luminaire luminous efficiency: 147lm/W
Controller: Electronic driver DALI2 (1 pcs.)
System output: 21W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03
Ambient temperatur: ta 25°C
Special properties: Ready for IoT
UGR lat./long.: 15.3 / 18.9
Certification mark: IP20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: cubus-RSAXHC-1200 LED 3100 840 DALI2 vw RAL 9016
Article number: 65240016660
Product deep link: https://www.regiolux.de/en/article/65240016660
General warranty conditions: www.regiolux.de/en/Service/Warranty
Cross-section | (QHB)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Dimensions
L 1188 mm Length
B 140 mm Width
H 64 mm Height
A1 1076 mm Mounting distance single mounting
A2 1126 mm Mounting distance 1st luminaire of the light run
A3 1176 mm Mounting distance between luminaires in a light run arrangement
P min 500 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Reference LED 3100lm 840
ηLB 100 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 15.3 / 18.9
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension


Similar products

Regiolux News – always up-to-date