hokal-HLHIMP/1200

hokal – universal light run system

Light channels are an integral part of modern architecture. The hokal luminaire series can be installed both as an individual luminaire or as a light run. It is irrelevant whether a suspended, surface-mounted or recessed luminaire is required. Thanks to matched lighting technologies and corresponding master luminaires, both high-quality office applications and corridor situations can be resolved elegantly.

hokal-HLHIMP/1200 Micro-prismatic diffuser direct/indirect distribution
hokal-HLHIMP/1200
LED 6000 840
sg RAL 9006
ED
hokal-HLHIMP/1200LED 6000 840sg RAL 9006ED
CHARACTERISTICS
Category Suspended luminaire/light run
Type hokal-HLHIMP/1200 LED 6000 840 ET sg RAL 9006
Order number 60511024195
EAN number 4020863319190
Commodity code 94051190
Certification mark IP 20, Protection class I, VDU 65°<3000, F, Indoor, CE
Impact resistance (IK rating) IK02
Ambient temperatur ta 25°C
Warranty period 5 years
State funding programs BEG - Federal funding for efficient buildings (valid only for Germany)
ELECTRICAL ENGINEERING
Controller Electronic driver (2 pcs.)
Wiring 3x1.5mm²
System output 42W
Mains voltage 230V/50Hz
Circuit breakers (inrush current) 19 pieces/B10
30 pieces/B16
31 pieces/C10
50 pieces/C16
Energy efficiency class/light source C
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3SDCM
Photobiological safety (Luminaire) RG0
Luminaire luminous flux 5951lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficiency 140lm/W
UGR lat./long. 12.1 / 12.5
MECHANICS
Housing colour silver grey/white aluminium RAL 9006
Dimensions (LxWxH/DxH) 1128mm x 85mm x 72mm
Weight (net) 3.2kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Suspended luminaire/light run; Sheet steel housing in square design; prepared for fixing of die-cast aluminium end faces or luminaire connectors made of steel; Housing colour silver grey/white aluminium RAL 9006; Homogeneous direct/indirect light distribution for standard-compliant VDU suitability in accordance with DIN EN 12464-1; glare reduction through microprism diffuser with special "multilayer" technology and optimised light deflecting foil; The light source is removable in accordance with the EU 2019/2020 ecodesign requirement and can be replaced at the factory. Electrical connection via 3-pin connection terminal with plug-in contacts. Including through-wiring. Accessories required: end faces, complete height-adjustable suspension set with suspension length 1900 mm; SET HLVMP connector must be ordered separately for light run installation. We recommend a minimum suspension of 0.6m when using light run installation. A homogeneous appearance of the lighting is guaranteed by the use of standard luminous flux variants with light run application. If building-related circumstances make different luminaire lengths necessary, the use of the 1200mm variant as start and end luminaire is recommended.

Dimensions (LxWxH/DxH): 1128mm x 85mm x 72mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG0
LED service life: 50000h L80/B10 (Tq 25°C)
Luminaire luminous flux: 5951lm
Luminaire luminous efficiency: 140lm/W
Controller: Electronic driver (2 pcs.)
Wiring: 3x1.5mm²
System output: 42W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK02
Ambient temperatur: ta 25°C
UGR lat./long.: 12.1 / 12.5
Certification mark: IP20, Protection class I, VDU 65°<3000, F, Indoor, CE

Regiolux GmbH
Type: hokal-HLHIMP/1200 LED 6000 840 ET sg RAL 9006
Article number: 60511024195
Product deep link: https://www.regiolux.de/en/article/60511024195
General warranty conditions: www.regiolux.de/en/Service/Warranty
Cross-section | (QH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Explosion drawing | (EXP)
Dimensions
L 1128 mm Length
B 85 mm Width
H 72 mm Height
A1 1070 mm Mounting distance single mounting
A2 1100 mm Mounting distance 1st luminaire of the light run
A3 1128 mm Mounting distance between luminaires in a light run arrangement
P min 400 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Reference LED 6000lm 840
ηLB 100 %
Φ ↓/↑ 32 % / 68 %
UGR lat./long. 12.1 / 12.5
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Accessories

1. hokal with FLVWR through-wiring
2. Luminaire connector HLV
3. Luminaire end faces set HLDS or HLDSG
4. Luminaire suspension SAY-DZ
5. Complete suspension set SAY-PS (incl. 1 x SAY-DZ)
7. Diffuser connector protection strip GSL

Similar products

Regiolux News – always up-to-date