Suspended luminaire/light run; Sheet steel housing in square design; prepared for fixing of die-cast aluminium end faces or luminaire connectors made of steel; Housing colour silver grey/white aluminium RAL 9006; Homogeneous direct/indirect light distribution for standard-compliant VDU suitability in accordance with DIN EN 12464-1; glare reduction through microprism diffuser with special "multilayer" technology and optimised light deflecting foil; The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Electrical connection via 3-pin connection terminal with plug-in contacts. Including through-wiring. Accessories required: end faces, complete height-adjustable suspension set with suspension length 1900 mm; SET HLVMP connector must be ordered separately for light run installation. We recommend a minimum suspension of 0.6m when using light run installation. A homogeneous appearance of the lighting is guaranteed by the use of standard luminous flux variants with light run application. If building-related circumstances make different luminaire lengths necessary, the use of the 1200mm variant as start and end luminaire is recommended.

Dimensions (LxWxH/DxH): 1408mm x 85mm x 72mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG0
LED service life: 50000h L80/B10 (Tq 25°C)
Nominal luminous flux: 8565lm
Luminaire luminous efficiency: 133lm/W
Controller: Electronic driver (2 pcs.)
Wiring: 5x1.5mm²
System output: 64W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK02
Ambient temperatur: ta 25°C
Certification mark: IP20, Protection class I, VDU 65°<3000, F, Indoor, CE

Regiolux GmbH
Type: hokal-HLHIMP/1500 LED  8600 840 ET sg RAL 9006 
Article number: 60513024195
Product deep link: https://www.regiolux.de/en/article/60513024195
General warranty conditions: www.regiolux.de/en/Service/Warranty