Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel, prepared for light run installation; Housing colour traffic white RAL 9016; Direct/indirect light distribution using micro prismatic glass, for workstations, 65° < 3000 cd/m² omnidirectional glare reduction according to current DIN-EN 12464-1 standard; The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Electrical connection and connection of control cable using 5-pole connection terminal with plug-in contacts. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately. Recommended minimum pendant length 0.5 m.

Dimensions (LxWxH/DxH): 1240mm x 198mm x 37mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 25°C)
Nominal luminous flux: 4084lm
Luminaire luminous efficiency: 143lm/W
Controller: Electronic driver DALI2 (1 pcs.)
System output: 29W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03
Ambient temperatur: ta 25°C
Special properties: Ready for IoT
UGR lat./long.: 14.8 / 15.4
Certification mark: IP20, Protection class I, VDU 65°<3000, F, Indoor, CE

Regiolux GmbH
Type: stail-SHLPI/1200-2 LED  4100 840 DALI2 vw RAL 9016 
Article number: 60332026690
Product deep link: https://www.regiolux.de/en/article/60332026690
General warranty conditions: www.regiolux.de/en/Service/Warranty