stail

stail – technical requirement and minimisation

Barely visible with a construction height of only 26 mm, an integral reflector with slot louvre and prismatic diffuser or micro louvre with low-section cross blades, single or twin lamp up to 2x54W - these are the impressive features of this slim-line beauty.
With its linear, minimalistic design, stail blends harmoniously into the architecture and offers a wide range of differing light characteristics, from direct via direct/indirect to primarily indirect beam distribution.

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 1x28/54 EVG sg
Order number 60301944195
EAN number 4020863180769
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 30 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x28/54W G5
MECHANICS
Housing colour silver grey/white aluminium RAL 9006
Dimensions LxWxH/DxH 1240 x 198 x 37 mm
Weight (net) 3.5 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour silver grey/white aluminium RAL 9006; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1240 x 198 x 37
Placement: Suitable for equipment fitting: T5 1x28/54W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 30
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 1x28/54 EVG sg
Article number: 60301944195
Product deep link: https://www.regiolux.de/en/article/60301944195
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)
Dimensions
L 1240 mm Length
B 198 mm Width
H 37 mm Height
A1 1216 mm Mounting distance single mounting
A2 1279 mm Mounting distance 1st luminaire of the light run
A3 1342 mm Mounting distance between luminaires in a light run arrangement
P min 150 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Placement T5 1x28W
ηLB 89 %
Φ ↓/↑ 7 % / 93 %
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 1x28/54 EVG vw
Order number 60301944190
EAN number 4020863180752
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 30 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x28/54W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1240 x 198 x 37 mm
Weight (net) 3.5 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour traffic white RAL 9016; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1240 x 198 x 37
Placement: Suitable for equipment fitting: T5 1x28/54W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 30
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 1x28/54 EVG vw
Article number: 60301944190
Product deep link: https://www.regiolux.de/en/article/60301944190
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)
Dimensions
L 1240 mm Length
B 198 mm Width
H 37 mm Height
A1 1216 mm Mounting distance single mounting
A2 1279 mm Mounting distance 1st luminaire of the light run
A3 1342 mm Mounting distance between luminaires in a light run arrangement
P min 150 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Placement T5 1x28W
ηLB 89 %
Φ ↓/↑ 7 % / 93 %
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 1x35/49/80 EVG sg
Order number 60301954195
EAN number 4020863180806
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 38 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Housing colour silver grey/white aluminium RAL 9006
Dimensions LxWxH/DxH 1540 x 198 x 37 mm
Weight (net) 4 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour silver grey/white aluminium RAL 9006; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1540 x 198 x 37
Placement: Suitable for equipment fitting: T5 1x35/49/80W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 38
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 1x35/49/80 EVG sg
Article number: 60301954195
Product deep link: https://www.regiolux.de/en/article/60301954195
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)
Dimensions
L 1540 mm Length
B 198 mm Width
H 37 mm Height
A1 1516 mm Mounting distance single mounting
A2 1579 mm Mounting distance 1st luminaire of the light run
A3 1642 mm Mounting distance between luminaires in a light run arrangement
P min 150 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Placement T5 1x35W
ηLB 89 %
Φ ↓/↑ 7 % / 93 %
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 1x35/49/80 EVG vw
Order number 60301954190
EAN number 4020863180790
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 38 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1540 x 198 x 37 mm
Weight (net) 4 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour traffic white RAL 9016; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1540 x 198 x 37
Placement: Suitable for equipment fitting: T5 1x35/49/80W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 38
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 1x35/49/80 EVG vw
Article number: 60301954190
Product deep link: https://www.regiolux.de/en/article/60301954190
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)
Dimensions
L 1540 mm Length
B 198 mm Width
H 37 mm Height
A1 1516 mm Mounting distance single mounting
A2 1579 mm Mounting distance 1st luminaire of the light run
A3 1642 mm Mounting distance between luminaires in a light run arrangement
P min 150 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Placement T5 1x35W
ηLB 89 %
Φ ↓/↑ 7 % / 93 %
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 2x28/54 EVG sg
Order number 60302944195
EAN number 4020863180783
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 116 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x28/54W G5
MECHANICS
Housing colour silver grey/white aluminium RAL 9006
Dimensions LxWxH/DxH 1240 x 198 x 37 mm
Weight (net) 3.9 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour silver grey/white aluminium RAL 9006; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1240 x 198 x 37
Placement: Suitable for equipment fitting: T5 2x28/54W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 116
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 2x28/54 EVG sg
Article number: 60302944195
Product deep link: https://www.regiolux.de/en/article/60302944195
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)
Dimensions
L 1240 mm Length
B 198 mm Width
H 37 mm Height
A1 1216 mm Mounting distance single mounting
A2 1279 mm Mounting distance 1st luminaire of the light run
A3 1342 mm Mounting distance between luminaires in a light run arrangement
P min 150 mm Minimum suspension length
P max 1900 mm Maximum suspension length
Light technology
Placement T5 2x54W
ηLB 88 %
Φ ↓/↑ 7 % / 93 %
VDU 65° < 1000cd/m²
LVK picture

Accessories for:


Accessories

Alternative suspension

CHARACTERISTICS
Category Pendant luminaire
Type stail-SHPI T5 2x28/54 EVG vw
Order number 60302944190
EAN number 4020863180776
Commodity code 94051098
Certification mark IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 60 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x28/54W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1240 x 198 x 37 mm
Weight (net) 3.9 kg
Type of installation Pendant individual mounting, Pendant light strip mounting
Pendant luminaire; Sheet steel housing, flat rectangular cross section, visible installation height 26 mm, end faces made of steel; Housing colour traffic white RAL 9016; Direct/indirect light distribution using aluminium slot louvre and microprismatic cover, for workstations, 65° < 1000 cd/m² omnidirectional glare suppression according to current DIN EN 12464-1 standard; Electrical connection via integrated transparent connection cable 3 x 0.75 mm², length 1900 mm, stripped cable ends. Required accessories: Y-wire suspension for/without electrical connection must be ordered separately.

Dimensions LxWxH/DxH (mm): 1240 x 198 x 37
Placement: Suitable for equipment fitting: T5 2x28/54W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 60
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, VDU 65°<1000, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: stail-SHPI T5 2x28/54 EVG vw
Article number: 60302944190
Product deep link: https://www.regiolux.de/en/article/60302944190
Cross-section | (QH)
Cross-section | (QH)
Cross-section | (QHH)
Cross-section | (QHH)
Longitudinal section | (LHH)
Longitudinal section | (LHH)
Longitudinal section | (LLHH)
Longitudinal section | (LLHH)