Carriers for special devices

Anything but usual

The quick-fit mounting system can do much more than just general lighting. Integrate spotlights into the system to highlight goods with device mounts on power rails. Does your wish list include efficiency and ease of operation? From sensors to Advanced Services such as networking or IoT - you’ve come to the right place.

SDBA LC07 1500vwControl + light presence sensor
CHARACTERISTICS
Category Sensor
Type SDBA LC07 1500 Regelung+Sensor Licht Präsenz vw
Order number 84186580224
EAN-number 4020863356539
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device LC07
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 98 x 96 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached motion sensor for daylight linking and presence-dependent control, wired ready for connection via integrated 11-pin plug connector.
System components used: motion sensor LC-BEG PD4-M-DALI-GH-AP
Actuation of up to 50 DALI/DSI controllers as a group; settings both manual and through remote control; any number of slave devices can be connected for the low-cost expansion of the monitoring area;
Monitoring area : vertical 360° oval; range : max. Ø 44 m lateral max. Ø 30 m frontal;
1 channel (light control); DALI/DSI-Master max. 50 DALI/DSI EVG; time setting 1-30min; brightness value 10-2500lx; installation height between 5-16m
See Advanced Services chapter for description. . A remote control (LC-BEG IR-PD-DALI-E) is also required to operate the control. Extension of the reception range is possible with LC-BEG PD4-S-GH_AP. Ball impact guard optional.

Dimensions LxWxH/DxH (mm): 1532 x 98 x 96
Operating device: LC07
Special features: Ready for IoT
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA LC07 1500 Regelung+Sensor Licht Präsenz vw
Article number: 84186580224
Product deep link: https://www.regiolux.de/en/article/84186580224

Accessories for:


Accessories

SDBA M12 1500vwControl + light presence sensor
CHARACTERISTICS
Category Sensor
Type SDBA M12 1500 Regelung+Sensor Licht Präsenz vw
Order number 84186580203
EAN-number 4020863274208
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device LC M12
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 98 x 96 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached motion sensor for daylight linking and presence-dependent control, wired ready for connection via integrated 11-pole plug connector.
System components used: motion sensor LC-BEG PD4-M-DALI-AP
functions: presence-dependent control of up to 50 DALI control units
See Advanced Services chapter for description.

Dimensions LxWxH/DxH (mm): 1532 x 98 x 96
Operating device: LC M12
Special features: Ready for IoT
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA M12 1500 Regelung+Sensor Licht Präsenz vw
Article number: 84186580203
Product deep link: https://www.regiolux.de/en/article/84186580203

Accessories for:


Accessories

CHARACTERISTICS
Category Sensor
Type SDBA S10 1500 Sensor Licht Präsenz vw
Order number 84186580200
EAN-number 4020863263424
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Advanced Services
ELECTRICAL ENGINEERING
Operating device LC S10
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 98 x 96 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached motion sensor for daylight linking and presence-dependent switching, wired ready for connection via integrated 11-pole plug connector.
System components used: motion sensor LC-BEG PD4-M-1C-GH-AP
Functions: presence-dependent switching up to 2300 W, cosφ=1
See Advanced Services chapter for description.

Dimensions LxWxH/DxH (mm): 1532 x 98 x 96
Operating device: LC S10
Special features: Advanced Services
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA S10 1500 Sensor Licht Präsenz vw
Article number: 84186580200
Product deep link: https://www.regiolux.de/en/article/84186580200

Accessories for:


Accessories

SDBA S17 1500vwMotion sensor extension
CHARACTERISTICS
Category Sensor
Type SDBA S17 1500 Erweiterungs-Sensor Bewegung vw
Order number 84186580202
EAN-number 4020863274192
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Advanced Services
ELECTRICAL ENGINEERING
Operating device LC S17
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 98 x 96 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached slave sensor for range extension, wired ready for connection via integrated 11-pole plug connector, can be used up to a mounting height of 10 m. System components used: motion sensor LC-BEG PD4-S-AP, functions: for range extension of a master sensor, see Light Control chapter for description.

Dimensions LxWxH/DxH (mm): 1532 x 98 x 96
Operating device: LC S17
Special features: Advanced Services
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA S17 1500 Erweiterungs-Sensor Bewegung vw
Article number: 84186580202
Product deep link: https://www.regiolux.de/en/article/84186580202

Accessories for:

CHARACTERISTICS
Category Sensor
Type SDBA S20 1500 Sensor Licht Präsenz vw
Order number 84186001200
EAN-number 4020863296163
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Advanced Services
ELECTRICAL ENGINEERING
Operating device LC S20
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 100 x 103 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached motion sensor for daylight linking and presence-dependent switching, wired ready for connection via integrated 11-pole plug connector.
System components used: motion sensor LC-BEG PD4-M-1C-AP
Functions: presence-dependent switching up to 2300 W
See Adcanced Services chapter for description.

Dimensions LxWxH/DxH (mm): 1532 x 100 x 103
Operating device: LC S20
Special features: Advanced Services
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA S20 1500 Sensor Licht Präsenz vw
Article number: 84186001200
Product deep link: https://www.regiolux.de/en/article/84186001200

Accessories for:


Accessories

SDBA S23 1500vwMotion sensor extension
CHARACTERISTICS
Category Sensor
Type SDBA S23 1500 Erweiterungs-Sensor Bewegung vw
Order number 84186580201
EAN-number 4020863263431
Commodity code 90328900
Certification mark IP 20, Indoor, CE
Special features Advanced Services
ELECTRICAL ENGINEERING
Operating device LC S23
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1532 x 98 x 96 mm
Weight (net) 1.1 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Sensor; Blank cover made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail, for the integration of sensors and control unit in the light run; Housing colour traffic white RAL 9016; Sensor unit with attached slave sensor for range extension, wired ready for connection via integrated 11-pole plug connector, can be used up to a mounting height of 14 m. System components used: motion sensor LC-BEG PD4-S-GH-AP, functions: for range extension of a master sensor, see Light Control chapter for description.

Dimensions LxWxH/DxH (mm): 1532 x 98 x 96
Operating device: LC S23
Special features: Advanced Services
Certification mark: IP 20, Indoor, CE

Regiolux GmbH
Type: SDBA S23 1500 Erweiterungs-Sensor Bewegung vw
Article number: 84186580201
Product deep link: https://www.regiolux.de/en/article/84186580201

Accessories for:


Similar products

Regiolux News – always up-to-date