Carriers for special devices

Anything but usual

The quick-fit mounting system can do much more than just general lighting. Integrate spotlights into the system to highlight goods with device mounts on power rails. Does your wish list include efficiency and ease of operation? From sensors to Advanced Services such as networking or IoT - you’ve come to the right place.

Type name Lamps Colour Circuit
SDGE open beam distribution direct, open beam distribution upgrade solution for SMT/SPT
SDGE
LED 7000 840
vw
ED
SDGE open beam distribution Direct/indirect distribution upgrade solution for SMT/SPT
SDGE
T5 1x35/49/80W G5
vw
ECG
SDGE
T5 2x35/49W G5
vw
ECG
SDGE
T8 1x58W G13
vw
ECG
SDGE
T8 2x58W G13
vw
ECG
CHARACTERISTICS
Category Renovation components
Type SDGE LED 7000 840 ET vw
Order number 18042014100
EAN number 4020863295012
Commodity code 94051098
Certification mark IP 20, Protection class I, F, Indoor, CE
Impact resistance (IK rating) IK08 (10°C bis 45°C)
Ambient temperatur ta 10°C to 45°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 43 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Luminaire luminous flux 7004 lm
LED service life 50000h L80/B10 (Tq 45°C)
Luminaire luminous efficacy 162 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 62 mm
Weight (net) 2.7 kg
Type of installation Mounting rail system installation
Renovation components, open beam distribution made of steel
Renovation device mount with two lateral lever locks, made of galvanised, profiled sheet steel, surface coated with polyester resin enamel; LED unit made of natural anodised extruded aluminium profile, end faces made of plastic; fixed 3-pole quick-fit plug connector for the SMT and SPT mounting rail systems with tool-free phase pre-selection and locating finger. Suitable for the mounting of LED light directing components;Light distribution directly as open distribution, LED diffuser cover made of polycarbonate;Can be combined with the self-supporting specular reflectors SDFA LED, SDFB LED, SDFT LED und SDFH LED. Can be combined with the self-supporting specular reflectors SDFA LED, SDFB LED, SDFT LED und SDFH LED.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 62
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
LED service life: 50000h L80/B10 (Tq 45°C)
Luminaire luminous flux (lm): 7004
Luminaire luminous efficacy (lm/W): 162
Controller: Electronic driver (1 pcs.)
System output (W): 43
Energy efficiency class: A++
Impact resistance (IK rating): IK08 (10°C bis 45°C)
Ambient temperatur: ta 10°C to 45°C
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE LED 7000 840 ET vw
Article number: 18042014100
Product deep link: https://www.regiolux.de/en/article/18042014100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1531 mm Length
B 55 mm Width
H 62 mm Height
Light technology
Placement LED 7000 840
ηLB 100 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 27.6 / 28.7
LVK picture
No images available

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category Renovation components
Type SDGE T5 1x35/49/80 EVG vw
Order number 18041954100
EAN number 4020863213757
Commodity code 94051098
Certification mark IP 20, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 52 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 55 x 77 mm
Weight (net) 1 kg
Type of installation Mounting rail system installation
Renovation components, open beam distribution made of steel
Renovation device mount made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail. Suitable for the mounting of reflectors and mirrors;Open distribution;Heat-resistant cables including fixed 3-pin quick-fit plug for the mounting rail systems SMT and SPT with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1533 x 55 x 77
Placement: Suitable for equipment fitting: T5 1x35/49/80W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 52
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE T5 1x35/49/80 EVG vw
Article number: 18041954100
Product deep link: https://www.regiolux.de/en/article/18041954100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 55 mm Width
H 77 mm Height
No images available

Accessories for:


Accessories

CHARACTERISTICS
Category Renovation components
Type SDGE T5 2x35/49 EVG vw
Order number 18042964100
EAN number 4020863217564
Commodity code 94051098
Certification mark IP 20, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 55 x 77 mm
Weight (net) 1.1 kg
Type of installation Mounting rail system installation
Renovation components, open beam distribution made of steel
Renovation device mount made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail. Suitable for the mounting of reflectors and mirrors;Open distribution;Heat-resistant cables including fixed 3-pin quick-fit plug for the mounting rail systems SMT and SPT with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1533 x 55 x 77
Placement: Suitable for equipment fitting: T5 2x35/49W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE T5 2x35/49 EVG vw
Article number: 18042964100
Product deep link: https://www.regiolux.de/en/article/18042964100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 55 mm Width
H 77 mm Height
No images available

Accessories for:


Accessories

CHARACTERISTICS
Category Renovation components
Type SDGE T8 1x58 EVG vw
Order number 18041584100
EAN number 4020863179626
Commodity code 94051098
Certification mark IP 20, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 55 x 87 mm
Weight (net) 1 kg
Type of installation Mounting rail system installation
Renovation components, open beam distribution made of steel
Renovation device mount made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail. Suitable for the mounting of reflectors and mirrors;open distribution;Heat-resistant cables including fixed 3-pole rapid installation plug connector for the mounting rail systems SMT and SPT with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1533 x 55 x 87
Placement: Suitable for equipment fitting: T8 1x58W G13
Controller: Standard electronic ballast (1 pcs.)
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE T8 1x58 EVG vw
Article number: 18041584100
Product deep link: https://www.regiolux.de/en/article/18041584100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 55 mm Width
H 87 mm Height
No images available

Accessories for:


Accessories

CHARACTERISTICS
Category Renovation components
Type SDGE T8 2x58 EVG vw
Order number 18042584100
EAN number 4020863179633
Commodity code 94051098
Certification mark IP 20, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 110 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 2x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 101 x 87 mm
Weight (net) 1.1 kg
Type of installation Mounting rail system installation
Renovation components, open beam distribution made of steel
Renovation device mount made of galvanised, profiled sheet steel; surface with polyester resin enamel coating; with two rotary catches for rapid fitting in the mounting rail. Suitable for the mounting of reflectors and mirrors;open distribution;Heat-resistant cables including fixed 3-pole rapid installation plug connector for the mounting rail systems SMT and SPT with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1533 x 101 x 87
Placement: Suitable for equipment fitting: T8 2x58W G13
Controller: Standard electronic ballast (1 pcs.)
System output (W): 110
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE T8 2x58 EVG vw
Article number: 18042584100
Product deep link: https://www.regiolux.de/en/article/18042584100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 101 mm Width
H 87 mm Height
No images available

Accessories for:


Accessories


Similar products

Regiolux News – always up-to-date