Device mount T5/T8

Conventional and simply good

Despite all of the advantages of LED technology – fluorescent lamps still have their uses. This is true for example in areas exposed to chemicals such as sulphur compounds, though also in the case of mains supplies that are not even registered by non-problematic magnetic ballasts.
But this is only any good if the desired lighting technology and light distribution are provided too, as is the case with our SDT system.

CHARACTERISTICS
Category Reflector
Type SDEC 1500 vw
Order number 18706015100
EAN-number 4020863151066
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1534 x 129 x 69 mm
Weight (net) 1.73 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Reflector; Reflector made of galvanised sheet steel, in attractive shape. Housing colour traffic white RAL 9016; Direct narrow-beam / wide-beam light distribution; Lighting technology for single and twin lamp T5 IP20 mounting. Reflector end piece SDECE to be ordered separately.

Dimensions LxWxH/DxH (mm): 1534 x 129 x 69
Certification mark: Indoor, CE

Regiolux GmbH
Type: SDEC 1500 vw
Article number: 18706015100
Product deep link: https://www.regiolux.de/en/article/18706015100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1534 mm Length
B 129 mm Width
H 69 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Reflector
Type SDEC 1500 wa
Order number 18706015105
EAN-number 4020863151363
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Colour of the housing white aluminium RAL 9006
Dimensions LxWxH/DxH 1534 x 129 x 69 mm
Weight (net) 1.73 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Reflector; Reflector made of galvanised sheet steel, in attractive shape. Housing colour white aluminium RAL 9006; Direct narrow-beam / wide-beam light distribution; Lighting technology for single and twin lamp T5 IP20 mounting. Reflector end piece SDECE to be ordered separately.

Dimensions LxWxH/DxH (mm): 1534 x 129 x 69
Certification mark: Indoor, CE

Regiolux GmbH
Type: SDEC 1500 wa
Article number: 18706015105
Product deep link: https://www.regiolux.de/en/article/18706015105
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1534 mm Length
B 129 mm Width
H 69 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SDEC T5 1x35/49/80 EVG vw
Order number SDT_1500_IP20_vw+18201954500+18706015100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, multi (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 129 x 122 mm
Weight (net) 4.4 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory; Version also available in the colour white aluminium RAL 9006.

Dimensions LxWxH/DxH (mm): 1535 x 129 x 122
Configuration: Suitable for equipment fitting: T5 1x35/49/80W G5
Operating device: Electronic ballast, multi (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SDEC T5 1x35/49/80 EVG vw
Article number: SDT_1500_IP20_vw+18201954500+18706015100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201954500+18706015100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 129 mm Width
H 122 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T5 1x49W
ηLB 89 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 21.3 / 24.2
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SDEC T5 1x49 EVG vw
Order number SDT_1500_IP20_vw+18201494500+18706015100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T5 1x49W G5
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 129 x 122 mm
Weight (net) 4.4 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory; Version also available in the colour white aluminium RAL 9006.

Dimensions LxWxH/DxH (mm): 1535 x 129 x 122
Configuration: Suitable for equipment fitting: T5 1x49W G5
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SDEC T5 1x49 EVG vw
Article number: SDT_1500_IP20_vw+18201494500+18706015100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201494500+18706015100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 129 mm Width
H 122 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T5 1x49W
ηLB 89 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 21.3 / 24.2
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SDEC T5 1x80 EVG vw
Order number SDT_1500_IP20_vw+18201804500+18706015100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 85 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T5 1x80W G5
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 129 x 122 mm
Weight (net) 4.4 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory; Version also available in the colour white aluminium RAL 9006.

Dimensions LxWxH/DxH (mm): 1535 x 129 x 122
Configuration: Suitable for equipment fitting: T5 1x80W G5
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 85
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SDEC T5 1x80 EVG vw
Article number: SDT_1500_IP20_vw+18201804500+18706015100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201804500+18706015100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 129 mm Width
H 122 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T5 1x80W
ηLB 90 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 22.5 / 25.5
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SDEC T5 2x35/49 EVG vw
Order number SDT_1500_IP20_vw+18202964500+18706015100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, multi (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T5 2x35/49W G5
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 129 x 122 mm
Weight (net) 4.5 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory; Version also available in the colour white aluminium RAL 9006.

Dimensions LxWxH/DxH (mm): 1535 x 129 x 122
Configuration: Suitable for equipment fitting: T5 2x35/49W G5
Operating device: Electronic ballast, multi (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SDEC T5 2x35/49 EVG vw
Article number: SDT_1500_IP20_vw+18202964500+18706015100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18202964500+18706015100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 129 mm Width
H 122 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T5 2x49W
ηLB 68 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 22.2 / 25.7
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SDEC T5 2x49 EVG vw
Order number SDT_1500_IP20_vw+18202494500+18706015100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T5 2x49W G5
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 129 x 122 mm
Weight (net) 4.5 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory; Version also available in the colour white aluminium RAL 9006.

Dimensions LxWxH/DxH (mm): 1535 x 129 x 122
Configuration: Suitable for equipment fitting: T5 2x49W G5
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SDEC T5 2x49 EVG vw
Article number: SDT_1500_IP20_vw+18202494500+18706015100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18202494500+18706015100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 129 mm Width
H 122 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T5 2x49W
ηLB 68 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 22.2 / 25.7
LVK picture

Accessories for:


Accessories