Device mount T5/T8

Conventional and simply good

Despite all of the advantages of LED technology – fluorescent lamps still have their uses. This is true for example in areas exposed to chemicals such as sulphur compounds, though also in the case of mains supplies that are not even registered by non-problematic magnetic ballasts.
But this is only any good if the desired lighting technology and light distribution are provided too, as is the case with our SDT system.

Type name Lamps Colour Circuit
2x SMSAC 1500 Mirror reflector insert, highly specular direct wide distribution
2x SMSAC 1500
aeh
SDT+SDG+SMC+2xSMSAC Comfort reflector, large, and highly specular mirror reflector insert direct wide distribution
SDT+SDG+SMC+2xSMSAC
T8 1x58W
vw
ECG
SDT+SDG B1+SMC+2xSMSAC Comfort reflector, large, and highly specular mirror reflector insert direct wide distribution
SDT+SDG B1+SMC+2xSMSAC
T8 1x58W
vw
ECG EM-B1
SDT+SDG B3+SMC+2xSMSAC Comfort reflector, large, and highly specular mirror reflector insert direct wide distribution
SDT+SDG B3+SMC+2xSMSAC
T8 1x58W
vw
ECG EM-B3
SDT+SDGM+SMC+2xSMSAC Comfort reflector, large, and highly specular mirror reflector insert direct wide distribution
SDT+SDGM+SMC+2xSMSAC
T8 1x58W
vw
Llb A2 ind.
SDT+SDGV+SMC+2xSMSAC Comfort reflector, large, and highly specular mirror reflector insert direct wide distribution
SDT+SDGV+SMC+2xSMSAC
T8 1x58W
vw
ECG
SMC 1500 Comfort reflector, large direct narrow/wide distribution
SMC 1500
vw
CHARACTERISTICS
Category Reflector insert
Type 2x SMSAC 1500 aeh
Order number 2x 18715580100
EAN-number 2x 4020863021284
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Colour of the housing high-gloss aluminium
Dimensions LxWxH/DxH 1460 x 109 x 18 mm
Weight (net) 0.28 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Reflector insert; High specular anodised ultra-pure aluminium reflector, for inserting in SMC reflector. Housing colour high-gloss aluminium; Direct wide-beam light distribution due to the use of the SMSAC reflector on both sides; lighting technology suitable for single lamp T8 IP20 mounting.

Dimensions LxWxH/DxH (mm): 1460 x 109 x 18
Certification mark: Indoor, CE

Regiolux GmbH
Type: 2x SMSAC 1500 aeh
Article number: 2x 18715580100
Product deep link: https://www.regiolux.de/en/article/2x 18715580100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1460 mm Length
B 109 mm Width
H 18 mm Height

Accessories for:

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SMC+2xSMSAC T8 1x58 EVG vw
Order number SDT_1500_IP20_vw+18201584100+18889580100+2x18715580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 145 mm
Weight (net) 5.88 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct wide-beam distribution, with asymmetrical mirror insert; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 145
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SMC+2xSMSAC T8 1x58 EVG vw
Article number: SDT_1500_IP20_vw+18201584100+18889580100+2x18715580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201584100+18889580100+2x18715580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 145 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 78 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 16.8 / 22.0
LVK picture

Accessories for:


Accessories

Mounting rail

SDT+SDG B1+SMC+2xSMSACT8 1x58WvwECG EM-B1
CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG B1+SMC+2xSMSAC T8 1x58 EVG NL-B1 vw
Order number SDT_1500_IP20_vw+18201587100+18889580100+2x18715580100
Certification mark IP 20, Protection class I, F, Indoor, CE
Ambient temperatur ta 10°C to 25°C
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard, emergency lighting 1 hour (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
Ballast lumen factor BLF (emergency lighting mode) 14(58W)
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 145 mm
Weight (net) 6.4 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; heat-resistant cables, including fixed 4-pole quick-fit plug connector with tool-free phase pre-selection and locating finger, one wire of the through-wiring can be used as non-switched charging phase using additional pole on the plug connector; inverter; batteries and LED as function control; one hour of emergency light operation with one lamp at reduced power possible. Housing colour traffic white RAL 9016; Reflector, direct wide-beam distribution, with asymmetrical mirror insert; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 145
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard, emergency lighting 1 hour (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Ballast lumen factor BLF (emergency lighting mode): 14(58W)
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Ambient temperatur: ta 10°C to 25°C
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG B1+SMC+2xSMSAC T8 1x58 EVG NL-B1 vw
Article number: SDT_1500_IP20_vw+18201587100+18889580100+2x18715580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201587100+18889580100+2x18715580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 145 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 78 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 16.8 / 22.0
LVK picture

Accessories for:


Accessories

Mounting rail

SDT+SDG B3+SMC+2xSMSACT8 1x58WvwECG EM-B3
CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG B3+SMC+2xSMSAC T8 1x58 EVG NL-B3 vw
Order number SDT_1500_IP20_vw+18201587700+18889580100+2x18715580100
Certification mark IP 20, Protection class I, F, Indoor, CE
Ambient temperatur ta 10°C to 25°C
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard, emergency lighting 3 hours (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
Ballast lumen factor BLF (emergency lighting mode) 6.5(58W)
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 145 mm
Weight (net) 6.9 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsionally stiff sheet steel, pre-galvanised; device mount of galvanised, profiled sheet steel; surface with polyester enamel coating; with two rotary catches for rapid fitting in the mounting rail; heat-resistant cables including fixed 4-pole quick-fit plug connector with tool-free phase pre-selection and locating finger; one wire from through-wiring can be used as unswitched charge phase via a supplementary pole at the plug; inverter; batteries and LED as function control; 3-hour emergency light operation with one lamp with reduced wattage possible. Housing colour traffic white RAL 9016; Reflector, direct wide-beam distribution, with asymmetrical mirror insert; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 145
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard, emergency lighting 3 hours (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Ballast lumen factor BLF (emergency lighting mode): 6.5(58W)
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Ambient temperatur: ta 10°C to 25°C
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG B3+SMC+2xSMSAC T8 1x58 EVG NL-B3 vw
Article number: SDT_1500_IP20_vw+18201587700+18889580100+2x18715580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201587700+18889580100+2x18715580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 145 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 78 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 16.8 / 22.0
LVK picture

Accessories for:


Accessories

Mounting rail

SDT+SDGM+SMC+2xSMSACT8 1x58WvwLlb A2 ind.
CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDGM+SMC+2xSMSAC T8 1x58 VVG A2 ind. vw
Order number SDT_1500_IP20_vw+18201581110+18889580100+2x18715580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Llb A2 inductive
System output 62 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 145 mm
Weight (net) 6.58 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct wide-beam distribution, with asymmetrical mirror insert; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 145
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Llb A2 inductive
Wiring: 5x1.5qmm
System output (W): 62
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDGM+SMC+2xSMSAC T8 1x58 VVG A2 ind. vw
Article number: SDT_1500_IP20_vw+18201581110+18889580100+2x18715580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201581110+18889580100+2x18715580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 145 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 78 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 16.8 / 22.0
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDGV+SMC+2xSMSAC T8 1x58 EVG vw
Order number SDT_1500_IP20_vw+18201584150+18889580100+2x18715580100
Certification mark IP 20, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 145 mm
Weight (net) 5.8 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant pre-galvanised sheet steel; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; can be positioned variably in the light run. Twin lamp version with offset lamp holders. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct wide-beam distribution, with asymmetrical mirror insert; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 145
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDGV+SMC+2xSMSAC T8 1x58 EVG vw
Article number: SDT_1500_IP20_vw+18201584150+18889580100+2x18715580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201584150+18889580100+2x18715580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 145 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 78 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 16.8 / 22.0
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Reflector
Type SMC 1500 vw
Order number 18889580100
EAN-number 4020863021253
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 182 x 100 mm
Weight (net) 2.72 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system Reflector; Reflector made of galvanised sheet steel, particularly elegant. Housing colour traffic white RAL 9016; Light distribution direct, narrow-beam / wide-beam; lighting technology suitable for single and twin lamp T8 IP20 mounting; Reflector end piece SMCE to be ordered separately.

Dimensions LxWxH/DxH (mm): 1533 x 182 x 100
Certification mark: Indoor, CE

Regiolux GmbH
Type: SMC 1500 vw
Article number: 18889580100
Product deep link: https://www.regiolux.de/en/article/18889580100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 182 mm Width
H 100 mm Height

Accessories for:


Accessories


Similar products

Regiolux News – always up-to-date