Device mount T5/T8

Conventional and simply good

Despite all of the advantages of LED technology – fluorescent lamps still have their uses. This is true for example in areas exposed to chemicals such as sulphur compounds, though also in the case of mains supplies that are not even registered by non-problematic magnetic ballasts.
But this is only any good if the desired lighting technology and light distribution are provided too, as is the case with our SDT system.

Type name Lamps Colour Circuit
SDT+SDG+SMC+SMPC Comfort reflector, large, and diffuser insert with longitudinal prisms direct narrow/wide distribution
SDT+SDG+SMC+SMPC
T8 1x58W
vw
ECG
SDT+SDG+SMC+SMPC
T8 2x58W
vw
ECG
SDT+SDG+SMCI+SMPC Comfort reflector, large, perforated, and diffuser pane insert with longitudinal prisms direct/indirect narrow/wide distribution
SDT+SDG+SMCI+SMPC
T8 1x58W
vw
ECG
SDT+SDG+SMCI+SMPC
T8 2x58W
vw
ECG
SDT+SDG B1+SMC+SMPC Comfort reflector, large, and diffuser insert with longitudinal prisms direct narrow/wide distribution
SDT+SDG B1+SMC+SMPC
T8 1x58W
vw
ECG EM-B1
SDT+SDG B1+SMC+SMPC
T8 2x58W
vw
ECG EM-B1
SDT+SDG B1+SMCI+SMPC Comfort reflector, large, perforated, and diffuser pane insert with longitudinal prisms direct/indirect narrow/wide distribution
SDT+SDG B1+SMCI+SMPC
T8 1x58W
vw
ECG EM-B1
SDT+SDG B1+SMCI+SMPC
T8 2x58W
vw
ECG EM-B1
SDT+SDG B3+SMC+SMPC Comfort reflector, large, and diffuser insert with longitudinal prisms direct narrow/wide distribution
SDT+SDG B3+SMC+SMPC
T8 1x58W
vw
ECG EM-B3
SDT+SDG B3+SMCI+SMPC Comfort reflector, large, perforated, and diffuser pane insert with longitudinal prisms direct/indirect narrow/wide distribution
SDT+SDG B3+SMCI+SMPC
T8 1x58W
vw
ECG EM-B3
SDT+SDGM+SMC+SMPC Comfort reflector, large, and diffuser insert with longitudinal prisms direct narrow/wide distribution
SDT+SDGM+SMC+SMPC
T8 1x58W
vw
Llb A2 ind.
SDT+SDGM+SMCI+SMPC Comfort reflector, large, perforated, and diffuser pane insert with longitudinal prisms direct/indirect narrow/wide distribution
SDT+SDGM+SMCI+SMPC
T8 1x58W
vw
Llb A2 ind.
SDT+SDGV+SMC+SMPC Comfort reflector, large, and diffuser insert with longitudinal prisms direct narrow/wide distribution
SDT+SDGV+SMC+SMPC
T8 1x58W
vw
ECG
SDT+SDGV+SMC+SMPC
T8 2x58W
vw
ECG
SDT+SDGV+SMCI+SMPC Comfort reflector, large, perforated, and diffuser pane insert with longitudinal prisms direct/indirect narrow/wide distribution
SDT+SDGV+SMCI+SMPC
T8 1x58W
vw
ECG
SDT+SDGV+SMCI+SMPC
T8 2x58W
vw
ECG
SMC 1500 Comfort reflector, large direct narrow/wide distribution
SMC 1500
vw
SMCI 1500 Comfort reflector, perforated, large direct/indirect narrow/wide distribution
SMCI 1500
vw
SMPC 1500 Diffuser pane insert, prismatic direct narrow/wide distribution
SMPC 1500
tz
CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SMC+SMPC T8 1x58 EVG vw
Order number SDT_1500_IP20_vw+18201584100+18889580100+18771580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 157 mm
Weight (net) 6.22 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution, with prismatic diffuser; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 157
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SMC+SMPC T8 1x58 EVG vw
Article number: SDT_1500_IP20_vw+18201584100+18889580100+18771580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201584100+18889580100+18771580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 157 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 67 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 21.3 / 19.4
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SMC+SMPC T8 2x58 EVG vw
Order number SDT_1500_IP20_vw+18202584100+18889580100+18771580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 110 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 2x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 157 mm
Weight (net) 6.32 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution, with prismatic diffuser; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 157
Configuration: Suitable for equipment fitting: T8 2x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 110
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SMC+SMPC T8 2x58 EVG vw
Article number: SDT_1500_IP20_vw+18202584100+18889580100+18771580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18202584100+18889580100+18771580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 157 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 2x58W
ηLB 57 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 23.4 / 21.1
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SMCI+SMPC T8 1x58 EVG vw
Order number SDT_1500_IP20_vw+18201584100+18881580100+18771580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 157 mm
Weight (net) 5.72 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam /wide-beam distribution / indirect wide.beam distribution, with prismatic diffuser; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 157
Configuration: Suitable for equipment fitting: T8 1x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SMCI+SMPC T8 1x58 EVG vw
Article number: SDT_1500_IP20_vw+18201584100+18881580100+18771580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18201584100+18881580100+18771580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 157 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 1x58W
ηLB 71 %
Φ ↓/↑ 87 % / 13 %
UGR lat./long. 19.5 / 16.6
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit light strip system
Type SDT+SDG+SMCI+SMPC T8 2x58 EVG vw
Order number SDT_1500_IP20_vw+18202584100+18881580100+18771580100
Certification mark IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Operating device Electronic ballast, standard (1 pcs.)
System output 110 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Configuration Suitable for equipment fitting: T8 2x58W G13
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 182 x 157 mm
Weight (net) 5.82 kg
Mounting method Mounting rail system mounting
Quick-fit light strip system; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam /wide-beam distribution / indirect wide.beam distribution, with prismatic diffuser; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 182 x 157
Configuration: Suitable for equipment fitting: T8 2x58W G13
Operating device: Electronic ballast, standard (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 110
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDT+SDG+SMCI+SMPC T8 2x58 EVG vw
Article number: SDT_1500_IP20_vw+18202584100+18881580100+18771580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP20_vw+18202584100+18881580100+18771580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 182 mm Width
H 157 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Configuration T8 2x58W
ηLB 64 %
Φ ↓/↑ 84 % / 16 %
UGR lat./long. 20.8 / 18.2
LVK picture

Accessories for:


Accessories