Device mount LED

Use LEDs in difficult environments too

It’s often not easy to find the right solution for a difficult working environment. Demands such as moisture, dirt, temperature or fire risk are only the most important in this case. Anything is possible with our SDT system and its IP54 protection rating thanks to a broad spectrum of lighting and ambient technology properties.

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOA LED 4000 840 DALI vw
Order number 18650106600
EAN number 4020863363131
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 45°C)
Ambient temperatur ta -20°C to 45°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 26 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 4358 lm
LED service life 50000h L80/B10 (Tq 45°C)
Luminaire luminous efficacy 170 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Installation without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Can be used in the track on the left or right. Housing colour traffic white RAL 9016; Direct asymmetric light distribution using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables with 2 fixed, 5-pin quick-fit rapid installation plug connectors with toolless phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 45°C)
Luminaire luminous flux (lm): 4358
Luminaire luminous efficacy (lm/W): 170
Controller: Electronic driver DALI (1 pcs.)
System output (W): 26
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 45°C)
Ambient temperatur: ta -20°C to 45°C
Special properties: Ready for IoT
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOA LED 4000 840 DALI vw
Article number: 18650106600
Product deep link: https://www.regiolux.de/en/article/18650106600
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 4000 840
ηLB 100 %
Φ ↓/↑ 98 % / 2 %
UGR lat./long. 16.0 / 19.2
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOA LED 4000 840 ET vw
Order number 18650104100
EAN number 4020863363124
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 45°C)
Ambient temperatur ta -20°C to 45°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 26 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 4358 lm
LED service life 50000h L80/B10 (Tq 45°C)
Luminaire luminous efficacy 170 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Installation without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Can be used in the track on the left or right. Housing colour traffic white RAL 9016; Direct asymmetric light distribution using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables with 2 fixed, 3-pin quick-fit rapid installation plug connectors with toolless phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 45°C)
Luminaire luminous flux (lm): 4358
Luminaire luminous efficacy (lm/W): 170
Controller: Electronic driver (1 pcs.)
System output (W): 26
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 45°C)
Ambient temperatur: ta -20°C to 45°C
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOA LED 4000 840 ET vw
Article number: 18650104100
Product deep link: https://www.regiolux.de/en/article/18650104100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 4000 840
ηLB 100 %
Φ ↓/↑ 98 % / 2 %
UGR lat./long. 16.0 / 19.2
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOA LED 6000 840 DALI vw
Order number 18650206600
EAN number 4020863363155
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 40°C)
Ambient temperatur ta -20°C to 40°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 37 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 6026 lm
LED service life 50000h L80/B10 (Tq 40°C)
Luminaire luminous efficacy 161 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Installation without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Can be used in the track on the left or right. Housing colour traffic white RAL 9016; Direct asymmetric light distribution using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables with 2 fixed, 5-pin quick-fit rapid installation plug connectors with toolless phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 40°C)
Luminaire luminous flux (lm): 6026
Luminaire luminous efficacy (lm/W): 161
Controller: Electronic driver DALI (1 pcs.)
System output (W): 37
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 40°C)
Ambient temperatur: ta -20°C to 40°C
Special properties: Ready for IoT
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOA LED 6000 840 DALI vw
Article number: 18650206600
Product deep link: https://www.regiolux.de/en/article/18650206600
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 6000 840
ηLB 100 %
Φ ↓/↑ 98 % / 2 %
UGR lat./long. 17.1 / 20.4
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOA LED 6000 840 ET vw
Order number 18650204100
EAN number 4020863363148
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 40°C)
Ambient temperatur ta -20°C to 40°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 37 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 6026 lm
LED service life 50000h L80/B10 (Tq 40°C)
Luminaire luminous efficacy 161 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Installation without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Can be used in the track on the left or right. Housing colour traffic white RAL 9016; Direct asymmetric light distribution using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables with 2 fixed, 3-pin quick-fit rapid installation plug connectors with toolless phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 40°C)
Luminaire luminous flux (lm): 6026
Luminaire luminous efficacy (lm/W): 161
Controller: Electronic driver (1 pcs.)
System output (W): 37
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 40°C)
Ambient temperatur: ta -20°C to 40°C
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOA LED 6000 840 ET vw
Article number: 18650204100
Product deep link: https://www.regiolux.de/en/article/18650204100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 6000 840
ηLB 100 %
Φ ↓/↑ 98 % / 2 %
UGR lat./long. 17.1 / 20.4
LVK picture

Accessories for:


Spare parts


Similar products

Regiolux News – always up-to-date