Device mount LED

Use LEDs in difficult environments too

It’s often not easy to find the right solution for a difficult working environment. Demands such as moisture, dirt, temperature or fire risk are only the most important in this case. Anything is possible with our SDT system and its IP54 protection rating thanks to a broad spectrum of lighting and ambient technology properties.

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 6000 840 DALI vw
Order number 18670206600
EAN number 4020863351244
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 40°C)
Ambient temperatur ta -20°C to 40°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 37 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 5682 lm
LED service life 50000h L80/B10 (Tq 40°C)
Luminaire luminous efficacy 152 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 40°C)
Luminaire luminous flux (lm): 5682
Luminaire luminous efficacy (lm/W): 152
Controller: Electronic driver DALI (1 pcs.)
System output (W): 37
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 40°C)
Ambient temperatur: ta -20°C to 40°C
Special properties: Ready for IoT
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 6000 840 DALI vw
Article number: 18670206600
Product deep link: https://www.regiolux.de/en/article/18670206600
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 6000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 25.5 / 24.9
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 6000 840 ET vw
Order number 18670204100
EAN number 4020863351237
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 40°C)
Ambient temperatur ta -20°C to 40°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 37 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 5682 lm
LED service life 50000h L80/B10 (Tq 40°C)
Luminaire luminous efficacy 152 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 40°C)
Luminaire luminous flux (lm): 5682
Luminaire luminous efficacy (lm/W): 152
Controller: Electronic driver (1 pcs.)
System output (W): 37
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 40°C)
Ambient temperatur: ta -20°C to 40°C
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 6000 840 ET vw
Article number: 18670204100
Product deep link: https://www.regiolux.de/en/article/18670204100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 6000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 25.5 / 24.9
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 8000 840 DALI vw
Order number 18670306600
EAN number 4020863351268
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 7666 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 144 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 7666
Luminaire luminous efficacy (lm/W): 144
Controller: Electronic driver DALI (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special properties: Ready for IoT
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 8000 840 DALI vw
Article number: 18670306600
Product deep link: https://www.regiolux.de/en/article/18670306600
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 8000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 26.5 / 25.9
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 8000 840 ET vw
Order number 18670304100
EAN number 4020863351251
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 7666 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 144 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 7666
Luminaire luminous efficacy (lm/W): 144
Controller: Electronic driver (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 8000 840 ET vw
Article number: 18670304100
Product deep link: https://www.regiolux.de/en/article/18670304100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 8000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 26.5 / 25.9
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 9000 840 DALI vw
Order number 18674306600
EAN number 4020863358175
Commodity code 94051098
Certification mark IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 53 W
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8739 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 166 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 8739
Luminaire luminous efficacy (lm/W): 166
Controller: Electronic driver DALI (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special properties: Ready for IoT
Certification mark: IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 9000 840 DALI vw
Article number: 18674306600
Product deep link: https://www.regiolux.de/en/article/18674306600
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 9000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 27.0 / 26.4
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 9000 840 ET vw
Order number 18674304100
EAN number 4020863358182
Commodity code 94051098
Certification mark IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 53 W
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8739 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 166 lm/W
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated pressure locks. Lighttechnical element with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Direct/indirect light distribution, diffuse light distribution using Individual.Lens.Optic made of frosted PMMA plastic. Continuous optics. Good anti-glare properties. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 8739
Luminaire luminous efficacy (lm/W): 166
Controller: Electronic driver (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Certification mark: IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOG LED 9000 840 ET vw
Article number: 18674304100
Product deep link: https://www.regiolux.de/en/article/18674304100
5 years warranty on almost all LED luminaires.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Placement LED 9000 840
ηLB 100 %
Φ ↓/↑ 90 % / 10 %
UGR lat./long. 27.0 / 26.4
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOG LED 10000 840 DALI vw
Order number 18670406600
EAN number 4020863351282
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 25°C)
Ambient temperatur ta -20°C to 25°C
Special properties Ready for IoT
ELECTRICAL ENGINEERING
Controller Electronic driver DALI (1 pcs.)
System output 70 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K