Device mount LED

Use LEDs in difficult environments too

It’s often not easy to find the right solution for a difficult working environment. Demands such as moisture, dirt, temperature or fire risk are only the most important in this case. Anything is possible with our SDT system and its IP54 protection rating thanks to a broad spectrum of lighting and ambient technology properties.

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 8000 840 DALI vw
Order number 18640306600
EAN-number 4020863326044
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, ENEC10 VDE, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device Electronic driver DALI (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8155 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 154 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 8155
Luminaire luminous efficacy (lm/W): 154
Operating device: Electronic driver DALI (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special features: Ready for IoT
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, ENEC10 VDE, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 8000 840 DALI vw
Article number: 18640306600
Product deep link: https://www.regiolux.de/en/article/18640306600
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 8000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.0 / 11.6
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 8000 840 DALI NL-B3 vw
Order number 18640376600
EAN-number 4020863326068
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (5°C bis 25°C)
Ambient temperatur ta 5°C to 25°C
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device Electronic driver DALI + emergency lighting 3 hours (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8155 lm
Luminaire luminous flux-emergency lighting mode 691 lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficacy 154 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 2.6 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. With 3 hours emergency lighting battery and integrated status indicator; 3 hours emergency lighting operation. Heat-resistant cables including fixed, 11-pin quick-fit plug connector with toolless phase pre-selection and locating finger. for use in SDT track>5-pole

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 25°C)
Luminaire luminous flux (lm): 8155
Luminaire luminous flux-emergency lighting mode (lm): 691
Luminaire luminous efficacy (lm/W): 154
Operating device: Electronic driver DALI + emergency lighting 3 hours (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (5°C bis 25°C)
Ambient temperatur: ta 5°C to 25°C
Special features: Ready for IoT
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 8000 840 DALI NL-B3 vw
Article number: 18640376600
Product deep link: https://www.regiolux.de/en/article/18640376600
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 8000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.0 / 11.6
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 8000 840 ET vw
Order number 18640304100
EAN-number 4020863326037
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, ENEC10 VDE, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
ELECTRICAL ENGINEERING
Operating device Electronic driver (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8155 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 154 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 8155
Luminaire luminous efficacy (lm/W): 154
Operating device: Electronic driver (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, ENEC10 VDE, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 8000 840 ET vw
Article number: 18640304100
Product deep link: https://www.regiolux.de/en/article/18640304100
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 8000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.0 / 11.6
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 8000 840 ET NL-B3 vw
Order number 18640374100
EAN-number 4020863326051
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (5°C bis 25°C)
Ambient temperatur ta 5°C to 25°C
ELECTRICAL ENGINEERING
Operating device Electronic driver emergency light 3 hours (1 pcs.)
System output 53 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 8155 lm
Luminaire luminous flux-emergency lighting mode 691 lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficacy 154 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 2.6 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. With 3 hours emergency lighting battery and integrated status indicator; 3 hours emergency lighting operation. Heat-resistant cables including permanently fixed, 4-pole quick-mounting plug connector with tool-less phase pre-selection and locating finger; one wire from the through-wiring can be used as un-switched charging phase using an additional pole on the plug connector;

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 25°C)
Luminaire luminous flux (lm): 8155
Luminaire luminous flux-emergency lighting mode (lm): 691
Luminaire luminous efficacy (lm/W): 154
Operating device: Electronic driver emergency light 3 hours (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (5°C bis 25°C)
Ambient temperatur: ta 5°C to 25°C
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 8000 840 ET NL-B3 vw
Article number: 18640374100
Product deep link: https://www.regiolux.de/en/article/18640374100
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 8000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.0 / 11.6
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 9000 840 DALI vw
Order number 18644306600
EAN-number 4020863358014
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (-20°C bis 35°C)
Ambient temperatur ta -20°C to 35°C
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device Electronic driver DALI (1 pcs.)
System output 53 W
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 9177 lm
LED service life 50000h L80/B10 (Tq 35°C)
Luminaire luminous efficacy 174 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 1.9 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-less phase pre-selection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 35°C)
Luminaire luminous flux (lm): 9177
Luminaire luminous efficacy (lm/W): 174
Operating device: Electronic driver DALI (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (-20°C bis 35°C)
Ambient temperatur: ta -20°C to 35°C
Special features: Ready for IoT
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 9000 840 DALI vw
Article number: 18644306600
Product deep link: https://www.regiolux.de/en/article/18644306600
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 9000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.3 / 12.2
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGSOH LED 9000 840 DALI NL-B3 vw
Order number 18644376600
EAN-number 4020863357994
Commodity code 94051098
Certification mark IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE
Impact resistance (IK rating) IK03 (5°C bis 25°C)
Ambient temperatur ta 5°C to 25°C
Special features Ready for IoT
ELECTRICAL ENGINEERING
Operating device Electronic driver DALI + emergency lighting 3 hours (1 pcs.)
System output 53 W
Energy efficiency class A++
LIGHTING TECHNOLOGY
Configuration LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3 SDCM
Luminaire luminous flux 9177 lm
Luminaire luminous flux-emergency lighting mode 759 lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficacy 174 lm/W
UGR 4H/8H UGR ≤ 19
MECHANICS
Colour of the housing traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 37 mm
Weight (net) 2.6 kg
Mounting method Mounting rail system mounting
Quick-fit mounting system IP 54 device mount; Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated press-on fasteners. Lighting elements with transparent seal, end faces made of plastic, all-round closed seal to mounting rail. Housing colour traffic white RAL 9016; Extremely direct narrow-beam light distribution with controlled rack lighting using Individual.Lens.Optic made of PMMA plastic. Continuous optics. Uniform LED spacing, even across the gap between circuit boards. 3-row LED arrangement. Light control components are easy to maintain thanks to the easily cleaned surface. With 3 hours emergency lighting battery and integrated status indicator; 3 hours emergency lighting operation. Heat-resistant cables including permanently fixed, 6-pole quick-mounting plug connector with tool-less phase pre-selection and locating finger; one wire from the through-wiring can be used as un-switched charging phase using an additional pole on the plug connector; for use in SDT track>5-pole

Dimensions LxWxH/DxH (mm): 1531 x 55 x 37
Configuration: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (SDCM): 3
LED service life: 50000h L80/B10 (Tq 25°C)
Luminaire luminous flux (lm): 9177
Luminaire luminous flux-emergency lighting mode (lm): 759
Luminaire luminous efficacy (lm/W): 174
Operating device: Electronic driver DALI + emergency lighting 3 hours (1 pcs.)
System output (W): 53
Energy efficiency class: A++
Impact resistance (IK rating): IK03 (5°C bis 25°C)
Ambient temperatur: ta 5°C to 25°C
Special features: Ready for IoT
UGR 4H/8H: UGR ≤ 19
Certification mark: IP 54, Protection class I, VDU 65°<3000, F, D, DIN10500/Food/IFS, Indoor, CE

Regiolux GmbH
Type: SDGSOH LED 9000 840 DALI NL-B3 vw
Article number: 18644376600
Product deep link: https://www.regiolux.de/en/article/18644376600
5 year warranty after registration on website.
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 37 mm Height
Light technology
Configuration LED 9000 840
ηLB 100 %
Φ ↓/↑ 99 % / 1 %
UGR lat./long. 13.3 / 12.2
VDU 65° < 3000cd/m²
LVK picture

Accessories for:


Spare parts

SDGSOHLED 9000 840vwED