Device mount T5/T8

Well-proven also means tough

Not all spatial situations can be solved convincingly with LED. We continue to offer device mounts and lighting accessories for conventional fluorescent lamps.
There’s not one single answer for every question but for every problem there is one solution – SDT.

CHARACTERISTICS
Category IP 54/FF device mount
Type SDGFF T5 1x35/49 EVG vw
Order number 18441964110
EAN number 4020863217717
Commodity code 94051098
Certification mark IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 52 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 107 mm
Weight (net) 1.64 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54/FF device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; transparent and all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders with glass protection tube made of polycarbonate. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution.with glass protection tube made of polycarbonate. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 107
Placement: Suitable for equipment fitting: T5 1x35/49W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 52
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGFF T5 1x35/49 EVG vw
Article number: 18441964110
Product deep link: https://www.regiolux.de/en/article/18441964110
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 107 mm Height

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54/FF device mount
Type SDGFF T5 2x35/49 EVG vw
Order number 18442964110
EAN number 4020863217724
Commodity code 94051098
Certification mark IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 137 x 107 mm
Weight (net) 1.92 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54/FF device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; transparent and all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders with glass protection tube made of polycarbonate. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution.with glass protection tube made of polycarbonate. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 137 x 107
Placement: Suitable for equipment fitting: T5 2x35/49W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: SDGFF T5 2x35/49 EVG vw
Article number: 18442964110
Product deep link: https://www.regiolux.de/en/article/18442964110
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 137 mm Width
H 107 mm Height

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGMS T8 1x58 VVG A2 ind. vw
Order number 18461581110
EAN number 4020863345816
Commodity code 94051098
Certification mark IP 54, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller VVG A2 inductive
System output 62 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 107 mm
Weight (net) 3.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for the rapid fitting in the mounting rail; all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 107
Placement: Suitable for equipment fitting: T8 1x58W G13
Controller: VVG A2 inductive
System output (W): 62
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGMS T8 1x58 VVG A2 ind. vw
Article number: 18461581110
Product deep link: https://www.regiolux.de/en/article/18461581110
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 107 mm Height
Light technology
Placement T8 1x58W
ηLB 96 %
Φ ↓/↑ 67 % / 33 %
UGR lat./long. 26.6 / 22.3
LVK picture

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGS T5 1x35/49/80 EVG vw
Order number 18461954100
EAN number 4020863208760
Commodity code 94051098
Certification mark IP 54, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 52 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 107 mm
Weight (net) 1.28 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 107
Placement: Suitable for equipment fitting: T5 1x35/49/80W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 52
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGS T5 1x35/49/80 EVG vw
Article number: 18461954100
Product deep link: https://www.regiolux.de/en/article/18461954100
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 107 mm Height
Light technology
Placement T5 1x49W
ηLB 97 %
Φ ↓/↑ 70 % / 30 %
UGR lat./long. 28.1 / 23.4
LVK picture

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGS T5 2x35/49 EVG vw
Order number 18462964100
EAN number 4020863217731
Commodity code 94051098
Certification mark IP 54, Protection class I, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 121 x 107 mm
Weight (net) 1.33 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 121 x 107
Placement: Suitable for equipment fitting: T5 2x35/49W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGS T5 2x35/49 EVG vw
Article number: 18462964100
Product deep link: https://www.regiolux.de/en/article/18462964100
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 121 mm Width
H 107 mm Height
Light technology
Placement T5 2x49W
ηLB 85 %
Φ ↓/↑ 63 % / 37 %
UGR lat./long. 27.1 / 20.4
LVK picture

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGS T8 1x58 EVG vw
Order number 18461584100
EAN number 4020863155347
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 55 x 107 mm
Weight (net) 1.28 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 55 x 107
Placement: Suitable for equipment fitting: T8 1x58W G13
Controller: Standard electronic ballast (1 pcs.)
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDGS T8 1x58 EVG vw
Article number: 18461584100
Product deep link: https://www.regiolux.de/en/article/18461584100
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 55 mm Width
H 107 mm Height
Light technology
Placement T8 1x58W
ηLB 96 %
Φ ↓/↑ 67 % / 33 %
UGR lat./long. 26.6 / 22.3
LVK picture

Accessories for:


Accessories

Spare parts

CHARACTERISTICS
Category IP 54 device mount
Type SDGS T8 2x58 EVG vw
Order number 18462584100
EAN number 4020863155415
Commodity code 94051098
Certification mark IP 54, Protection class I, ENEC10 VDE, F, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 110 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 2x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1531 x 121 x 107 mm
Weight (net) 1.33 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; all-round closed seal for the mounting rail to guarantee the protection rating for wet-room lamp holders. Suitable for the mounting of reflectors and mirrors. Housing colour traffic white RAL 9016; Direct / indirect open lighting distribution. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger.

Dimensions LxWxH/DxH (mm): 1531 x 121 x 107
Placement: Suitable for equipment fitting: T8 2x58W G13
Controller: Standard electronic ballast (1 pcs.)
System output (W): 110
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDGS T8 2x58 EVG vw
Article number: 18462584100
Product deep link: https://www.regiolux.de/en/article/18462584100
Cross-section | (Q)
Cross-section | (Q)
Cross-section | (QG)
Cross-section | (QG)
Dimensions
L 1531 mm Length
B 121 mm Width
H 107 mm Height
Light technology
Placement T8 2x58W
ηLB 96 %
Φ ↓/↑ 63 % / 37 %
UGR lat./long. 26.5 / 21.2
LVK picture

Accessories for:


Accessories

Spare parts


Similar products

Regiolux News – always up-to-date