Device mount T5/T8

Well-proven also means tough

Not all spatial situations can be solved convincingly with LED. We continue to offer device mounts and lighting accessories for conventional fluorescent lamps.
There’s not one single answer for every question but for every problem there is one solution – SDT.

CHARACTERISTICS
Category Reflector
Type SDR 1500 vw
Order number 18705580100
EAN number 4020863035885
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1533 x 200 x 85 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, Reflector, Modullänge/1500. Reflector made of galvanised sheet steel. Housing colour traffic white RAL 9016; Direct narrow-beam / wide-beam light distribution; lighting technology suitable for single and twin lamp T8 IP20 and T5 IP54 and for single and twin lamp T5 IP54 mounting. Reflector end piece SDRE to be ordered separately.

Dimensions LxWxH/DxH (mm): 1533 x 200 x 85
Certification mark: Indoor, CE

Regiolux GmbH
Type: SDR 1500 vw
Article number: 18705580100
Product deep link: https://www.regiolux.de/en/article/18705580100
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 200 mm Width
H 85 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Reflector
Type SDR 1500 wa
Order number 18705580105
EAN number 4020863101849
Commodity code 94059900
Certification mark Indoor, CE
MECHANICS
Housing colour white aluminium RAL 9006
Dimensions LxWxH/DxH 1533 x 200 x 85 mm
Weight (net) 1.9 kg
Type of installation Mounting rail system installation
Quick-fit mounting system, Reflector, Modullänge/1500. Reflector made of galvanised sheet steel. Housing colour white aluminium RAL 9006; Direct narrow-beam / wide-beam light distribution; lighting technology suitable for single and twin lamp T8 IP20 and T5 IP54 and for single and twin lamp T5 IP54 mounting. Reflector end piece SDRE to be ordered separately.

Dimensions LxWxH/DxH (mm): 1533 x 200 x 85
Certification mark: Indoor, CE

Regiolux GmbH
Type: SDR 1500 wa
Article number: 18705580105
Product deep link: https://www.regiolux.de/en/article/18705580105
Cross-section | (Q)
Cross-section | (Q)
Dimensions
L 1533 mm Length
B 200 mm Width
H 85 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Quick-fit Rapid installation light strip system
Type SDT+SDGFF+SDR T5 1x35/49 EVG vw
Order number SDT_1500_IP54_vw+18441964110+18705580100
Certification mark IP 54, Protection class I, F, D, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 52 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 200 x 137 mm
Weight (net) 4.8 kg
Type of installation Mounting rail system installation
Quick-fit Rapid installation light strip system, Modullänge/1500; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; to guarantee the protection rating with wet-room lamp holders, with glass protection tube made of clear polycarbonate, with heat dissipation sleeves at the ends, the mounting rail is sealed with an all-round closed seal made of age-resistant rubber. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct lighting; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 200 x 137
Placement: Suitable for equipment fitting: T5 1x35/49W G5
Controller: Standard electronic ballast (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 52
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, D, Indoor, CE

Regiolux GmbH
Type: SDT+SDGFF+SDR T5 1x35/49 EVG vw
Article number: SDT_1500_IP54_vw+18441964110+18705580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP54_vw+18441964110+18705580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 200 mm Width
H 137 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Placement T5 1x49W
ηLB 82 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 20.3 / 21.2
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit Rapid installation light strip system
Type SDT+SDGFF+SDR T5 2x35/49 EVG vw
Order number SDT_1500_IP54_vw+18442964110+18705580100
Certification mark IP 54, Protection class I, F, D, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x35/49W G5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 200 x 137 mm
Weight (net) 4.8 kg
Type of installation Mounting rail system installation
Quick-fit Rapid installation light strip system, Modullänge/1500; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; to guarantee the protection rating with wet-room lamp holders, with glass protection tube made of clear polycarbonate, with heat dissipation sleeves at the ends, the mounting rail is sealed with an all-round closed seal made of age-resistant rubber. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct lighting; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 200 x 137
Placement: Suitable for equipment fitting: T5 2x35/49W G5
Controller: Standard electronic ballast (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, D, Indoor, CE

Regiolux GmbH
Type: SDT+SDGFF+SDR T5 2x35/49 EVG vw
Article number: SDT_1500_IP54_vw+18442964110+18705580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP54_vw+18442964110+18705580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 200 mm Width
H 137 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Placement T5 2x49W
ηLB 74 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 22.3 / 23.0
LVK picture

Accessories for:


Accessories

Mounting rail

CHARACTERISTICS
Category Quick-fit Rapid installation light strip system
Type SDT+SDGFF+SDR T8 1x58 EVG vw
Order number SDT_1500_IP54_vw+18441584110+18705580100
Certification mark IP 54, Protection class I, F, D, Indoor, CE
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 55 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T8 1x58W G13
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 200 x 137 mm
Weight (net) 4.8 kg
Type of installation Mounting rail system installation
Quick-fit Rapid installation light strip system, Modullänge/1500; Mounting rail made of profiled, torsion-resistant sheet steel, pre-galvanised; device mount insert made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; with two rotary catches for rapid fitting in the mounting rail; to guarantee the protection rating with wet-room lamp holders, with glass protection tube made of clear polycarbonate, with heat dissipation sleeves at the ends, the mounting rail is sealed with an all-round closed seal made of age-resistant rubber. Suitable for the fastening of reflectors and mirrors; Housing colour traffic white RAL 9016; Reflector, direct narrow-beam/wide-beam distribution; Flat ribbon cabling installed and wired on quick-fit socket unit at the factory;

Dimensions LxWxH/DxH (mm): 1535 x 200 x 137
Placement: Suitable for equipment fitting: T8 1x58W G13
Controller: Standard electronic ballast (1 pcs.)
Wiring: 5x1.5qmm
System output (W): 55
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Certification mark: IP 54, Protection class I, F, D, Indoor, CE

Regiolux GmbH
Type: SDT+SDGFF+SDR T8 1x58 EVG vw
Article number: SDT_1500_IP54_vw+18441584110+18705580100
Product deep link: https://www.regiolux.de/en/article/SDT_1500_IP54_vw+18441584110+18705580100
Cross-section | (Q)
Cross-section | (Q)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Dimensions
L 1535 mm Length
B 200 mm Width
H 137 mm Height
A1 2302.5 mm Mounting distance single mounting
Light technology
Placement T8 1x58W
ηLB 67 %
Φ ↓/↑ 100 % / 0 %
UGR lat./long. 20.4 / 21.3
LVK picture

Accessories for:


Accessories

Mounting rail