Mounting rails

SDT – the basis for success

The most important thing about our mounting rail is that it’s always the same. No matter whether IP20 or IP54, LED or fluorescent tube, the rail can always be fitted in a jiffy. You only have to chose the wiring and colour, white or silver. It doesn’t get any easier.

Type name Colour Description Note
SDT 1500/I 5x2.5qmm
vw
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
SDT 1500/I 5x2.5qmm
wa
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
SDT 1500/II 5x2.5qmm
vw
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
SDT 1500/II 5x2.5qmm
wa
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
SDT 1500/III 5x2.5qmm
vw
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
SDT 1500/III 5x2.5qmm
wa
Mounting rail made of steel
Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised;
Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as electronic ballast versions, the distance between the vertical suspension points can be increased to maximum 3.5 m. For larger distances (up to 4.5 m), a suspension with the suspension profile SDT -AP or using an M suspension via a central bracket SDT -ZA is optionally possible.
Attention: The suspensions are only designed for horizontal light runs. Please contact us for slanted hanging or other arrangements.
Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.
CHARACTERISTICS
Category Mounting rail
Type SDT 1500/I 5x2.5qmm vw
Order number 18261580100
EAN number 4020863054466
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 1535 x 63 x 46 mm
Weight (net) 1.65 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour traffic white RAL 9016; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 1535 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/I 5x2.5qmm vw
Article number: 18261580100
Product deep link: https://www.regiolux.de/en/article/18261580100
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 1535 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Mounting rail
Type SDT 1500/I 5x2.5qmm wa
Order number 18261580105
EAN number 4020863101726
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour white aluminium RAL 9006
Dimensions LxWxH/DxH 1535 x 63 x 46 mm
Weight (net) 1.65 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour white aluminium RAL 9006; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 1535 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/I 5x2.5qmm wa
Article number: 18261580105
Product deep link: https://www.regiolux.de/en/article/18261580105
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 1535 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Mounting rail
Type SDT 1500/II 5x2.5qmm vw
Order number 18262580100
EAN number 4020863035847
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 3070 x 63 x 46 mm
Weight (net) 3.3 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour traffic white RAL 9016; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 3070 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/II 5x2.5qmm vw
Article number: 18262580100
Product deep link: https://www.regiolux.de/en/article/18262580100
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 3070 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Mounting rail
Type SDT 1500/II 5x2.5qmm wa
Order number 18262580105
EAN number 4020863101733
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour white aluminium RAL 9006
Dimensions LxWxH/DxH 3070 x 63 x 46 mm
Weight (net) 3.3 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour white aluminium RAL 9006; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 3070 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/II 5x2.5qmm wa
Article number: 18262580105
Product deep link: https://www.regiolux.de/en/article/18262580105
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 3070 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Mounting rail
Type SDT 1500/III 5x2.5qmm vw
Order number 18263580100
EAN number 4020863035816
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour traffic white RAL 9016
Dimensions LxWxH/DxH 4605 x 63 x 46 mm
Weight (net) 4.8 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour traffic white RAL 9016; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 4605 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/III 5x2.5qmm vw
Article number: 18263580100
Product deep link: https://www.regiolux.de/en/article/18263580100
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 4605 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories

CHARACTERISTICS
Category Mounting rail
Type SDT 1500/III 5x2.5qmm wa
Order number 18263580105
EAN number 4020863101740
Commodity code 94059900
Certification mark IP 20/40/54, Protection class I, Indoor, CE
MECHANICS
Housing colour white aluminium RAL 9006
Dimensions LxWxH/DxH 4605 x 63 x 46 mm
Weight (net) 4.8 kg
Type of installation Mounting rail system installation
Quick-fit mounting system Mounting rail; Mounting rail made of profiled, torsion-resistant sheet steel, pregalvanised; Housing colour white aluminium RAL 9006; Flat ribbon cabling installed and wired on rapid mounting socket unit at the factory. Can be optionally equipped with LED, T5 or T8 device mounts. Please order separately connection and assembly accessories as well as rail end pieces and connectors.

Dimensions LxWxH/DxH (mm): 4605 x 63 x 46
Wiring: 5x2.5qmm
Certification mark: IP 20/40/54, Protection class I, Indoor, CE

Regiolux GmbH
Type: SDT 1500/III 5x2.5qmm wa
Article number: 18263580105
Product deep link: https://www.regiolux.de/en/article/18263580105
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (L)
Longitudinal section | (L)
Longitudinal section | (LL)
Longitudinal section | (LL)
Dimensions
L 4605 mm Length
B 63 mm Width
H 46 mm Height

Accessories for:


Accessories


Similar products