SDT-Quick-fit mounting system, IP 40 variable device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel; surface coated with polyester resin. Fastening without tools with two integrated rotary catches. LED unit made of natural anodised extruded aluminium profile with end faces made of plastic. Variably positionable on the mounting rail. Housing colour traffic white RAL 9016; Direct, general diffuse light distribution. LED diffuser cover made of polycarbonate. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including connection cable 1 m and rapid installation plug connector with tool-less phase pre-selection and locating finger. The device mount can be adjusted variably in steps with a multi-lumen driver (default setting: maximum lumen output). They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 43mm
Beam angle: 115° (C0) / 105 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 40°C)
Nominal luminous flux/switching steps (EDM): 8100lm/51W, 7000lm/43W, 5900lm/36W, 4800lm/29W
Luminaire luminous efficiency: 169lm/W-159lm/W
Controller: Electronic multi-lumen driver, 4-steps  (1 pcs.)
System output: 51W-29W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK08 (10°C bis 40°C)
Ambient temperatur: ta 10°C to 40°C
UGR lat./long.: 28.1 / 29.2 (51W)
Certification mark: IP40, Protection class I, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGV /1500 LED  8100-4800 840 ETM vw RAL 9016 
Article number: 18208404150
Product deep link: https://www.regiolux.de/en/article/18208404150
General warranty conditions: www.regiolux.de/en/Service/Warranty