SDT-Quick-fit mounting system, Variable device mount, Modullänge/1500. Device mount with two lateral lever locks, made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; LED unit made of natural anodised extruded aluminium profile, in housing length for optically seamless light run, end faces made of plastic; can be positioned variably in light run. Housing colour traffic white RAL 9016; Light distribution direct as open distribution, matt LED diffuser cover made of polycarbonate. For optically seamless light run design. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including connection cable 1 m and rapid installation plug connector with tool-less phase pre-selection and locating finger. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 43mm
Beam angle: 115° (C0) / 105 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 45°C)
Nominal luminous flux: 4712lm
Luminaire luminous efficiency: 173lm/W
Controller: Electronic driver DALI2 (1 pcs.)
System output: 27W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (10°C bis 45°C)
Ambient temperatur: ta 10°C to 45°C
Special properties: Ready for IoT
UGR lat./long.: 25.2 / 26.4
Certification mark: IP20, Protection class I, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGVL /1500 LED  4500 840 DALI2 vw RAL 9016 
Article number: 18210306650
Product deep link: https://www.regiolux.de/en/article/18210306650
General warranty conditions: www.regiolux.de/en/Service/Warranty