SDT-Quick-fit mounting system, IP 64 device mount, Modullänge/1500. Support d'appareils en profil de tôle d'acier zinguée, le revêtement en zinc associé à la laque à résine de polyester assure une bonne protection contre la corrosion; La fixation sans outils à verrouillages par pression intégrés au design assure une protection contre le vol et le démontage. Embouts en matière plastique intégrés avec lèvres d'étanchéité et joint continu sur le pourtour côté rail support pour type de protection jusqu'à IP64. Housing colour traffic white RAL 9016; Direct, wide-beam light distribution using individual LED lens optic made of PMMA plastic. The single lens optics has a transparent seal, ensures absolute ease of assembly and are simple to maintain thanks to the easily cleaned surface. The inner rhythm of the 3-row single lens arrangement and the overriding device mount are perfectly in tune to guarantee a homogeneous appearance in the object. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including fixed, 4-pin, quick-fit plug connector with toolless phase preselection and locating finger; With 3h emergency lighting battery; Luminaire status by visible status LED in luminaire (NL-B3); Luminous flux in emergency light mode 780 lm. One wire of the through-wiring can be used as unswitched charge phase using an additional pole on the plug connector;. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 33mm
Beam angle: 95° (C0) / 95 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 25°C)
Nominal luminous flux: 6074lm
Nominal luminous flux-emergency lighting mode: 780lm
Luminaire luminous efficiency: 162lm/W
Controller: Electronic driver 3h emergency lighting (1 pcs.)
System output: 37W
Energy efficiency class/light source: D
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (5°C bis 25°C)
Ambient temperatur: ta 5°C to 25°C
UGR lat./long.: 20.0 / 20.4
Certification mark: IP64, Protection class I, F, D, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGSOB /1500 LED  6000 840 ET NL-B3 vw RAL 9016 
Article number: 18610274100
Product deep link: https://www.regiolux.de/en/article/18610274100
General warranty conditions: www.regiolux.de/en/Service/Warranty