KLKF/0600

KL surface-mounted diffuser luminaires – eternal classics

These surface-mounted diffuser luminaires as linear luminaire are all-rounders for many different applications. With their all-round closed diffusers they obtain best results with regard to their luminaire maintenance factor and are installed in the twinkling of an eye thanks to their time-saving connection technology via plug-in connection.
In addition the KL series luminaires can be protected from mechanical loads via a chromate wire protective cage. On request, all models can be equipped with an emergency lampholder or with other emergency light systems. The luminaires can be easily suspended from mounting rails, enabling even further possibilities for application.

KLKF/0600 Opal diffuser direct/indirect distribution
KLKF/0600
LED 2500 840
tw RAL 9016
ED
KLKF/0600LED 2500 840tw RAL 9016ED
CHARACTERISTICS
Category Diffuser luminaire
Type KLKF/0600 LED 2500 840 ET vw RAL 9016
Order number 21100614120
EAN number 4020863348596
Commodity code 94051140
Certification mark IP 50, Protection class I, F, Indoor, CE
Impact resistance (IK rating) IK02
Ambient temperatur ta 25°C
Warranty period 5 years
State funding programs BEG - Federal funding for efficient buildings (valid only for Germany)
ELECTRICAL ENGINEERING
Controller Electronic driver (1 pcs.)
System output 19W
Mains voltage 230V/50Hz
Circuit breakers (inrush current) 21 pieces/B10
34 pieces/B16
35 pieces/C10
57 pieces/C16
Energy efficiency class/light source C
LIGHTING TECHNOLOGY
Placement LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam) 3SDCM
Photobiological safety (Luminaire) RG1
Luminaire luminous flux 2516lm
LED service life 50000h L80/B10 (Tq 25°C)
Luminaire luminous efficiency 130lm/W
UGR lat./long. 23.7 / 21.5
MECHANICS
Housing colour traffic white RAL 9016
Dimensions (LxWxH/DxH) 615mm x 90mm x 71mm
Weight (net) 1.55kg
Cable entry KE (X/Y) 160mm/0mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Wall mounting, Pendant individual mounting
Diffuser luminaire; sheet steel luminaire body, deep drawn; with foam seal and rotary lever locks; Housing colour traffic white RAL 9016; Direct/indirect light distribution using opal acrylic diffuser, with high corner strength drawn from one piece; The light source is removable in accordance with the EU 2019/2020 ecodesign requirement and can be replaced at the factory. Electrical connection via 3-pole connection terminal with plug-in contacts.. Note on protection rating: IP50 for ceiling and wall mounting, IP40 for mounting rails and suspended installations.

Dimensions (LxWxH/DxH): 615mm x 90mm x 71mm
Cable entry KE (X/Y): 160mm/0mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 25°C)
Luminaire luminous flux: 2516lm
Luminaire luminous efficiency: 130lm/W
Controller: Electronic driver (1 pcs.)
System output: 19W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK02
Ambient temperatur: ta 25°C
UGR lat./long.: 23.7 / 21.5
Certification mark: IP50, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: KLKF/0600 LED 2500 840 ET vw RAL 9016
Article number: 21100614120
Product deep link: https://www.regiolux.de/en/article/21100614120
General warranty conditions: www.regiolux.de/en/Service/Warranty
Cross-section | (Q)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Dimensions
L 615 mm Length
B 90 mm Width
H 71 mm Height
A1 490 mm Mounting distance single mounting
A3 130 mm Mounting distance between luminaires in a light run arrangement
X 160 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Reference LED 2500lm 840
ηLB 100 %
Φ ↓/↑ 82 % / 18 %
UGR lat./long. 23.7 / 21.5
LVK picture

Accessories for:


Accessories

1. SDT basic unwired mounting rail
2. SDTSV mounting rail connector
3. SDTE mounting rail protective cover (end face)
4. Mounting rail fixing / suspension SDH/SDD/SDCT/SDT-ZA/SDT-AP
5. Suspension (chain)
6. Luminaire fixing SDLA/SDLAD
7. Blank cover SDBAV/SDBK

Alternative suspension

Mounting rail

Spare parts

Regiolux News – always up-to-date