PU

PU/PUPC – state-of-the-art both today and tomorrow

You can expect the following from a damp-proof luminaire: high protection rating, compact housing dimensions, high quality materials and complete ease of mounting and maintenance. High IP65 protection rating and D symbol. Rough environments with high dust and humidity exposure and danger from fire have no effect on the luminaire. Compact dimensions with a width of only 86 millimetres (single-lamp, T5) and a luminaire body of resilient and environmentally neutral glass fibre reinforced polyester. Depending upon demands and the application environment, either acrylic (PU) or polycarbonate (PUPC) are selected for the diffusers with inner prismatics, and diffuser catches and mounting clips are of course of rust-free stainless steel. The mounting clip on the housing can be pushed along and the slotted hole enables drill hole compensation in the transverse direction. With the integrated, lateral wings the clip can be snapped into corresponding mounting rails without additional accessories. If the included bracket is snapped into the clip the luminaire can be suspended with a standard chain. In short, a product where everything has been thought of.

CHARACTERISTICS
Category Luminaire with a higher protection rating
Type PU T5 1x28/54 EVG hg
Order number 56601944161
EAN number 4020863223565
Commodity code 94051040
Certification mark IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK02
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 58 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x28/54W G5
MECHANICS
Housing colour light grey
Dimensions LxWxH/DxH 1277 x 86 x 100 mm
Weight (net) 1.9 kg
Cable entry KE X/Y 0 mm / 0 mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Pendant individual mounting, Wall mounting
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, with line inserts as per the protection rating on the rear side of the housing and each face side, device mount made from sheet steel painted white with clip attachment. Housing colour light grey; injection moulded acrylic glass diffuser, transparent with longitudinal grooves; Electrical connection via 3-pole connection terminal with plug-in contacts. Through-wiring of the luminaires is only permissible using heat-resistant cables such as our PU-DV through-wiring cable.

Dimensions LxWxH/DxH (mm): 1277 x 86 x 100
Cable entry KE X/Y (mm): 0 / 0
Placement: Suitable for equipment fitting: T5 1x28/54W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 58
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Impact resistance (IK rating): IK02
Certification mark: IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: PU T5 1x28/54 EVG hg
Article number: 56601944161
Product deep link: https://www.regiolux.de/en/article/56601944161
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (LL)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Cable entry | (KE X/Y)
Dimensions
L 1277 mm Length
B 86 mm Width
H 100 mm Height
A1 700 mm Mounting distance single mounting
A1 alternativ 800 mm Mounting distance single mounting (alternatively)
A3 576 mm Mounting distance between luminaires in a light run arrangement
X 0 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Placement T5 1x54W
ηLB 89 %
Φ ↓/↑ 87 % / 13 %
UGR lat./long. 26.5 / 17.7
LVK picture

Accessories for:


Accessories

Mounting rail

Spare parts

CHARACTERISTICS
Category Luminaire with a higher protection rating
Type PU T5 1x35/49/80 EVG hg
Order number 56601954161
EAN number 4020863223572
Commodity code 94051040
Certification mark IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK02
ELECTRICAL ENGINEERING
Controller Electronic ballast multi (1 pcs.)
System output 52 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 1x35/49/80W G5
MECHANICS
Housing colour light grey
Dimensions LxWxH/DxH 1577 x 86 x 100 mm
Weight (net) 2.1 kg
Cable entry KE X/Y 0 mm / 0 mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Pendant individual mounting, Wall mounting
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, with line inserts as per the protection rating on the rear side of the housing and each face side, device mount made from sheet steel painted white with clip attachment. Housing colour light grey; injection moulded acrylic glass diffuser, transparent with longitudinal grooves; Electrical connection via 3-pole connection terminal with plug-in contacts. Through-wiring of the luminaires is only permissible using heat-resistant cables such as our PU-DV through-wiring cable.

Dimensions LxWxH/DxH (mm): 1577 x 86 x 100
Cable entry KE X/Y (mm): 0 / 0
Placement: Suitable for equipment fitting: T5 1x35/49/80W G5
Controller: Electronic ballast multi (1 pcs.)
System output (W): 52
Energy efficiency class: A
Energy efficiency class CELMA EEI: A2
Impact resistance (IK rating): IK02
Certification mark: IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: PU T5 1x35/49/80 EVG hg
Article number: 56601954161
Product deep link: https://www.regiolux.de/en/article/56601954161
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (LL)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Cable entry | (KE X/Y)
Dimensions
L 1577 mm Length
B 86 mm Width
H 100 mm Height
A1 1000 mm Mounting distance single mounting
A1 alternativ 1100 mm Mounting distance single mounting (alternatively)
A3 576 mm Mounting distance between luminaires in a light run arrangement
X 0 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Placement T5 1x49W
ηLB 96 %
Φ ↓/↑ 88 % / 12 %
UGR lat./long. 25.7 / 17.6
LVK picture

Accessories for:


Accessories

Mounting rail

Spare parts

CHARACTERISTICS
Category Luminaire with a higher protection rating
Type PU T5 2x28 EVG hg
Order number 56602284161
EAN number 4020863227327
Commodity code 94051040
Certification mark IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK02
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 60 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x28W G5
MECHANICS
Housing colour light grey
Dimensions LxWxH/DxH 1277 x 112 x 104 mm
Weight (net) 2.1 kg
Cable entry KE X/Y 0 mm / 0 mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Pendant individual mounting, Wall mounting
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, with line inserts as per the protection rating on the rear side of the housing and each face side, device mount made from sheet steel painted white with clip attachment. Housing colour light grey; injection moulded acrylic glass diffuser, transparent with longitudinal grooves; Electrical connection via 3-pole connection terminal with plug-in contacts. Through-wiring of the luminaires is only permissible using heat-resistant cables such as our PU-DV through-wiring cable.

Dimensions LxWxH/DxH (mm): 1277 x 112 x 104
Cable entry KE X/Y (mm): 0 / 0
Placement: Suitable for equipment fitting: T5 2x28W G5
Controller: Standard electronic ballast (1 pcs.)
System output (W): 60
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Impact resistance (IK rating): IK02
Certification mark: IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: PU T5 2x28 EVG hg
Article number: 56602284161
Product deep link: https://www.regiolux.de/en/article/56602284161
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (LL)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Cable entry | (KE X/Y)
Dimensions
L 1277 mm Length
B 112 mm Width
H 104 mm Height
A1 700 mm Mounting distance single mounting
A1 alternativ 800 mm Mounting distance single mounting (alternatively)
A3 576 mm Mounting distance between luminaires in a light run arrangement
X 0 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Placement T5 2x28W
ηLB 88 %
Φ ↓/↑ 91 % / 9 %
UGR lat./long. 26.3 / 19.7
LVK picture

Accessories for:


Accessories

Mounting rail

Spare parts

CHARACTERISTICS
Category Luminaire with a higher protection rating
Type PU T5 2x35 EVG hg
Order number 56602354161
EAN number 4020863227716
Commodity code 94051040
Certification mark IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK02
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 76 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x35W G5
MECHANICS
Housing colour light grey
Dimensions LxWxH/DxH 1577 x 112 x 104 mm
Weight (net) 2.3 kg
Cable entry KE X/Y 0 mm / 0 mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Pendant individual mounting, Wall mounting
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, with line inserts as per the protection rating on the rear side of the housing and each face side, device mount made from sheet steel painted white with clip attachment. Housing colour light grey; injection moulded acrylic glass diffuser, transparent with longitudinal grooves; Electrical connection via 3-pole connection terminal with plug-in contacts. Through-wiring of the luminaires is only permissible using heat-resistant cables such as our PU-DV through-wiring cable.

Dimensions LxWxH/DxH (mm): 1577 x 112 x 104
Cable entry KE X/Y (mm): 0 / 0
Placement: Suitable for equipment fitting: T5 2x35W G5
Controller: Standard electronic ballast (1 pcs.)
System output (W): 76
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Impact resistance (IK rating): IK02
Certification mark: IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: PU T5 2x35 EVG hg
Article number: 56602354161
Product deep link: https://www.regiolux.de/en/article/56602354161
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (LL)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Cable entry | (KE X/Y)
Dimensions
L 1577 mm Length
B 112 mm Width
H 104 mm Height
A1 1000 mm Mounting distance single mounting
A1 alternativ 1100 mm Mounting distance single mounting (alternatively)
A3 576 mm Mounting distance between luminaires in a light run arrangement
X 0 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Placement T5 2x35W
ηLB 88 %
Φ ↓/↑ 91 % / 9 %
UGR lat./long. 26.4 / 19.8
LVK picture

Accessories for:


Accessories

Mounting rail

Spare parts

CHARACTERISTICS
Category Luminaire with a higher protection rating
Type PU T5 2x49 EVG hg
Order number 56602494161
EAN number 4020863228324
Commodity code 94051040
Certification mark IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE
Impact resistance (IK rating) IK02
ELECTRICAL ENGINEERING
Controller Standard electronic ballast (1 pcs.)
System output 104 W
Mains voltage 230 V / 50 Hz
Energy efficiency class A+
Energy efficiency class CELMA EEI A2
LIGHTING TECHNOLOGY
Placement Suitable for equipment fitting: T5 2x49W G5
MECHANICS
Housing colour light grey
Dimensions LxWxH/DxH 1577 x 112 x 104 mm
Weight (net) 2.3 kg
Cable entry KE X/Y 0 mm / 0 mm
Type of installation Individual surface mounting, Surface-mounted light run installation, Mounting rail installation, Pendant individual mounting, Wall mounting
Luminaire with a higher protection rating; Housing made of glass-fibre reinforced polyester, with PUR foam age-resistant sealing in the surrounding edge, stainless steel diffuser clips, with line inserts as per the protection rating on the rear side of the housing and each face side, device mount made from sheet steel painted white with clip attachment. Housing colour light grey; injection moulded acrylic glass diffuser, transparent with longitudinal grooves; Electrical connection via 3-pole connection terminal with plug-in contacts. Through-wiring of the luminaires is only permissible using heat-resistant cables such as our PU-DV through-wiring cable.

Dimensions LxWxH/DxH (mm): 1577 x 112 x 104
Cable entry KE X/Y (mm): 0 / 0
Placement: Suitable for equipment fitting: T5 2x49W G5
Controller: Standard electronic ballast (1 pcs.)
System output (W): 104
Energy efficiency class: A+
Energy efficiency class CELMA EEI: A2
Impact resistance (IK rating): IK02
Certification mark: IP 65, Protection class I, ENEC11, F, D, HACCP DIN10500/Food/IFS/BRC, Indoor, CE

Regiolux GmbH
Type: PU T5 2x49 EVG hg
Article number: 56602494161
Product deep link: https://www.regiolux.de/en/article/56602494161
Cross-section | (Q)
Cross-section | (Q)
Longitudinal section | (LL)
Longitudinal section | (LL)
Miscellaneous-section | (EXT)
Miscellaneous-section | (EXT)
Explosion drawing | (EXP)
Explosion drawing | (EXP)
Cable entry | (KE X/Y)
Cable entry | (KE X/Y)
Dimensions
L 1577 mm Length
B 112 mm Width
H 104 mm Height
A1 1000 mm Mounting distance single mounting
A1 alternativ 1100 mm Mounting distance single mounting (alternatively)
A3 576 mm Mounting distance between luminaires in a light run arrangement
X 0 mm Distance cable infeed to the center of the luminaire on the X-axis
Y 0 mm Distance cable infeed to the center of the luminaire on the Y-axis
Light technology
Placement T5 2x49W
ηLB 91 %
Φ ↓/↑ 91 % / 9 %
UGR lat./long. 27.5 / 20.9
LVK picture

Accessories for:


Accessories

Mounting rail

Spare parts


Similar products

Regiolux News – always up-to-date