SDGE

Renovation of light runs - because cost-effectiveness is key

Light runs of the rapid-installation mounting system SMT and SPT have been operational for 25 years and longer. These lighting systems were often not continuously adjusted to the state of technology. This leads to a significant energy savings potential. But it is not always necessary to replace the whole system. A cost-efficient and easy mounting renovation by exchanging the existing device mounts with refurbishment device mounts the whole system will meet the changed economic, ecologic and ergonomic requirements: Energy costs are reduced, the lower consumption is less of a burden to the environment, the maintenance intervals are improved and the lighting situation of the object is enhanced.


SDGE Matt diffuser direct, open distribution upgrade solution for SMT/SPT
SDGE	LED 7000 840	tw RAL 9016	ED	Selection

SDGELED 7000 840tw RAL 9016ED

Accessories

CHARACTERISTICS
Category	Renovation device mount for SMT/SPT quick fit mounting system
Type	SDGE LED 7000 840 ET vw RAL 9016
Order number	18042014100
EAN number	4020863295012
Commodity code	94051190
Certification mark	IP 20, Protection class I, F, Indoor, CE
Impact resistance (IK rating)	IK08 (10°C bis 45°C)
Ambient temperatur	ta 10°C to 45°C
Warranty period	5 years
State funding programs	BEG - Federal funding for efficient buildings (valid only for Germany)

ELECTRICAL ENGINEERING
Controller	Electronic driver (1 pcs.)
System output	43W
Mains voltage	230V/50Hz
Circuit breakers (inrush current)	13 pieces/B10 22 pieces/B16 22 pieces/C10 37 pieces/C16
Energy efficiency class/light source	B

LIGHTING TECHNOLOGY
Placement	LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam)	3SDCM
Nominal luminous flux	7004lm
LED service life	50000h L80/B10 (Tq 45°C)
Luminaire luminous efficiency	162lm/W
UGR lat./long.	27.6 / 28.7

MECHANICS
Housing colour	traffic white RAL 9016
Dimensions (LxWxH/DxH)	1531mm x 55mm x 62mm
Weight (net)	2.7kg
Type of installation	Mounting rail system installation

Downloads

Product datasheet Tender text Mounting instructions EULUMDAT file IES file

Tender text

Renovation device mount for SMT/SPT quick fit mounting system, IP20, module length / 1500; simple, tool-free mounting on SMT/SPT support rails using rotary catches; device mount, made of galvanised, profiled sheet steel, surface coated with polyester resin. LED unit made of a naturally anodised, extruded aluminium profile with end faces made of plastic. Housing colour traffic white RAL 9016, Direct, open light distribution, LED diffuser cover made of polycarbonate; electrical connection by means of fixed-position 3-pole quick fit mounting connectors with tool-free phase preselection and search finger. Ideally suited as a replacement for a conventional single or dual lamp T8/T5 quick fit mounting system. Light distribution directly as open distribution, LED diffuser cover made of polycarbonate;

Dimensions (LxWxH/DxH): 1531mm x 55mm x 62mm
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 45°C)
Nominal luminous flux: 7004lm
Luminaire luminous efficiency: 162lm/W
Controller: Electronic driver (1 pcs.)
System output: 43W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK08 (10°C bis 45°C)
Ambient temperatur: ta 10°C to 45°C
UGR lat./long.: 27.6 / 28.7
Certification mark: IP20, Protection class I, F, Indoor, CE

Regiolux GmbH
Type: SDGE LED 7000 840 ET vw RAL 9016
Article number: 18042014100
Product deep link: https://www.regiolux.de/en/article/18042014100
General warranty conditions: www.regiolux.de/en/Service/Warranty

Dimensional sketch

Cross-section | (Q)