SDGS /1500

IP54? – why not

It goes without saying that people now expect Light-Control in IP54 environments too. Which is why we offer not just simple blanks units but also device mounts with sensor system and a high protection rating.


SDGS /1500 Matt diffuser direct diffuse distribution.
SDGS /1500	LED 7000 840	tw RAL 9016	DALI2	Selection

SDGS /1500LED 7000 840tw RAL 9016DALI2

Modify article selection

Similar products

Accessories

CHARACTERISTICS
Category	IP 54 device mount
Type	SDGS /1500 LED 7000 840 DALI2 vw RAL 9016
Order number	18462016600
EAN number	4020863286317
Commodity code	94051190
Certification mark	IP 54, Protection class I, F, D, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE
Impact resistance (IK rating)	IK06 (0°C bis 45°C)
Ambient temperatur	ta 0°C to 45°C
Special properties	Ready for IoT
Warranty period	5 years
State funding programs	BEG - Federal funding for efficient buildings (valid only for Germany)

ELECTRICAL ENGINEERING
Controller	Electronic driver DALI2 (1 pcs.)
System output	43W
Mains voltage	230V/50Hz
Circuit breakers (inrush current)	13 pieces/B10 22 pieces/B16 21 pieces/C10 36 pieces/C16
Energy efficiency class/light source	B

LIGHTING TECHNOLOGY
Placement	LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam)	3SDCM
Nominal luminous flux	7004lm
LED service life	50000h L80/B10 (Tq 45°C)
Luminaire luminous efficiency	162lm/W
Beam angle	115° (C0) / 105 ° (C90)
UGR lat./long.	27.6 / 28.7

MECHANICS
Housing colour	traffic white RAL 9016
Dimensions (LxWxH/DxH)	1531mm x 55mm x 43mm
Weight (net)	2kg
Type of installation	Mounting rail system installation

Downloads

Product datasheet Tender text Mounting instructions Product picture Project image Relux ROLFZ file EULUMDAT file IES file BIM RFA file Certificate Light run configurator

Light calculation

Tender text

SDT-Quick-fit mounting system, IP 54 device mount, Modullänge/1500. Device mount, made of galvanised, profiled sheet steel with zinc coating and combined with polyester resin paint guarantees good corrosion protection; tool-free fastening with two integrated push locks. LED unit made of natural anodised extruded aluminium profile with end faces made of plastic. Suitable for the attachment of LED light directing components. End faces made of plastic, all-round closed seal to the support rail. Housing colour traffic white RAL 9016; Direct, general diffuse light distribution. LED diffuser cover made of polycarbonate. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-free phase preselection and locating finger. Can be combined with the self-supporting specular reflectors SDFA LED, SDFB LED, SDFT LED und SDFH LED. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 43mm
Beam angle: 115° (C0) / 105 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
LED service life: 50000h L80/B10 (Tq 45°C)
Nominal luminous flux: 7004lm
Luminaire luminous efficiency: 162lm/W
Controller: Electronic driver DALI2 (1 pcs.)
System output: 43W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK06 (0°C bis 45°C)
Ambient temperatur: ta 0°C to 45°C
Special properties: Ready for IoT
UGR lat./long.: 27.6 / 28.7
Certification mark: IP54, Protection class I, F, D, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGS /1500 LED 7000 840 DALI2 vw RAL 9016
Article number: 18462016600
Product deep link: https://www.regiolux.de/en/article/18462016600
General warranty conditions: www.regiolux.de/en/Service/Warranty

Dimensional sketch

Cross-section | (Q)