SDGLK /1500

A simply convincing choice

The range of uses defines the range of products A number of different device mounts are on offer with an IP20 and IP40 protective rating for use in fixed or variable modules. Three different optical systems, each combined with up to eight light characteristics cater for every wish. The light levels of between 4,000 and 12,000 lumen let you achieve any level of illumination you want. If you choose a multi-driver you can even adjust the light output on the building site. Just the way you or the user want it.


SDGLK /1500 Opal diffuser direct/indirect distribution visually continuous
SDGLK /1500	LED 5000 840	tw RAL 9016	ED	Selection

SDGLK /1500LED 5000 840tw RAL 9016ED

Modify article selection

Similar products

Accessories

CHARACTERISTICS
Category	Device mount
Type	SDGLK /1500 LED 5000 840 ET vw RAL 9016
Order number	18230304100
EAN number	4020863299874
Commodity code	94051190
Certification mark	IP 20, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE
Impact resistance (IK rating)	IK03 (10°C bis 40°C)
Ambient temperatur	ta 10°C to 40°C
Warranty period	5 years
State funding programs	BEG - Federal funding for efficient buildings (valid only for Germany)

ELECTRICAL ENGINEERING
Controller	Electronic driver (1 pcs.)
System output	27W
Mains voltage	230V/50Hz
Circuit breakers (inrush current)	15 pieces/B10 25 pieces/B16 24 pieces/C10 38 pieces/C16
Energy efficiency class/light source	B

LIGHTING TECHNOLOGY
Placement	LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam)	3SDCM
Photobiological safety (Luminaire)	RG1
Nominal luminous flux	4873lm
LED service life	50000h L80/B10 (Tq 40°C)
Luminaire luminous efficiency	179lm/W
Beam angle	130° (C0) / 110 ° (C90)
UGR lat./long.	23.9 / 22.4

MECHANICS
Housing colour	traffic white RAL 9016
Dimensions (LxWxH/DxH)	1531mm x 63mm x 54mm
Weight (net)	2kg
Type of installation	Mounting rail system installation

Downloads

Product datasheet Tender text Mounting instructions Product picture Project images Relux ROLFZ file EULUMDAT file IES file BIM RFA file Certificate Light run configurator

Light calculation

Tender text

SDT-Quick-fit mounting system, Device mount, Modullänge/1500. Device mount made of a galvanised, profiled steel sheet; surface coated with polyester resin. Tool-free attachment with integrated side lever catches for rapid fitting in the mounting rail. LED unit in housing length for a continuous effect light run Housing colour traffic white RAL 9016; Direct/indirect light distribution, opal diffuser made of PMMA plastic with inner longitudinal prisms produces a uniform, homogeneous appearance with ceiling brightening. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including fixed 3-pole rapid installation plug connector with tool-free phase preselection and locating finger They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 63mm x 54mm
Beam angle: 130° (C0) / 110 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 40°C)
Nominal luminous flux: 4873lm
Luminaire luminous efficiency: 179lm/W
Controller: Electronic driver (1 pcs.)
System output: 27W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (10°C bis 40°C)
Ambient temperatur: ta 10°C to 40°C
UGR lat./long.: 23.9 / 22.4
Certification mark: IP20, Protection class I, ENEC10 VDE, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGLK /1500 LED 5000 840 ET vw RAL 9016
Article number: 18230304100
Product deep link: https://www.regiolux.de/en/article/18230304100
General warranty conditions: www.regiolux.de/en/Service/Warranty

Dimensional sketch

Cross-section | (Q)