SDGBG /1500

A simply convincing choice

The range of uses defines the range of products A number of different device mounts are on offer with an IP20 and IP40 protective rating for use in fixed or variable modules. Three different optical systems, each combined with up to eight light characteristics cater for every wish. The light levels of between 4,000 and 12,000 lumen let you achieve any level of illumination you want. If you choose a multi-driver you can even adjust the light output on the building site. Just the way you or the user want it.


SDGBG /1500 Frosted diffuser direct/indirect diffuse distribution visually continuous
SDGBG /1500	LED 7400 840	tw RAL 9016	DALI2	Selection

SDGBG /1500LED 7400 840tw RAL 9016DALI2

Modify article selection

Similar products

Accessories

CHARACTERISTICS
Category	Device mount
Type	SDGBG /1500 LED 7400 840 DALI2 vw RAL 9016
Order number	18191406600
EAN number	4020863356645
Commodity code	94051190
Certification mark	IP 20, Protection class I, ENEC10 VDE, F, Indoor, CE
Impact resistance (IK rating)	IK03 (25°C bis 35°C)
Ambient temperatur	ta 25°C to 35°C
Special properties	Ready for IoT
Warranty period	5 years
State funding programs	BEG - Federal funding for efficient buildings (valid only for Germany)

ELECTRICAL ENGINEERING
Controller	Electronic driver DALI2 (1 pcs.)
System output	49W
Mains voltage	230V/50Hz
Circuit breakers (inrush current)	13 pieces/B10 24 pieces/B16 25 pieces/C10 40 pieces/C16
Energy efficiency class/light source	C

LIGHTING TECHNOLOGY
Placement	LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam)	3SDCM
Photobiological safety (Luminaire)	RG1
Nominal luminous flux	7546lm
LED service life	50000h L80/B10 (Tq 35°C)
Luminaire luminous efficiency	156lm/W
Beam angle	110° (C0) / 125 ° (C90)
UGR lat./long.	26.1 / 30.6

MECHANICS
Housing colour	traffic white RAL 9016
Dimensions (LxWxH/DxH)	1531mm x 55mm x 42mm
Weight (net)	1.43kg
Type of installation	Mounting rail system installation

Downloads

Product datasheet Tender text Mounting instructions Product picture Project images Relux ROLFZ file EULUMDAT file IES file BIM RFA file Light run configurator

Light calculation

Tender text

SDT-Quick-fit mounting system, Device mount, Modullänge/1500. Device mount made of galvanised, profiled sheet steel, surface coated with polyester resin enamel. Toolless fastening with two integrated lateral lever locks. LED unit in housing length for optically seamless light run. Housing colour traffic white RAL 9016; Direct light distribution, frosted diffuser made of PMMA plastic. Continuous row lighting design. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including fixed 5-pole rapid installation plug connector with tool-free phase preselection and locating finger. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 42mm
Beam angle: 110° (C0) / 125 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 35°C)
Nominal luminous flux: 7546lm
Luminaire luminous efficiency: 156lm/W
Controller: Electronic driver DALI2 (1 pcs.)
System output: 49W
Energy efficiency class/light source: C
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (25°C bis 35°C)
Ambient temperatur: ta 25°C to 35°C
Special properties: Ready for IoT
UGR lat./long.: 26.1 / 30.6
Certification mark: IP20, Protection class I, ENEC10 VDE, F, Indoor, CE

Regiolux GmbH
Type: SDGBG /1500 LED 7400 840 DALI2 vw RAL 9016
Article number: 18191406600
Product deep link: https://www.regiolux.de/en/article/18191406600
General warranty conditions: www.regiolux.de/en/Service/Warranty

Dimensional sketch

Cross-section | (Q)