SDGVL /1500

A simply convincing choice

The range of uses defines the range of products A number of different device mounts are on offer with an IP20 and IP40 protective rating for use in fixed or variable modules. Three different optical systems, each combined with up to eight light characteristics cater for every wish. The light levels of between 4,000 and 12,000 lumen let you achieve any level of illumination you want. If you choose a multi-driver you can even adjust the light output on the building site. Just the way you or the user want it.


SDGVL /1500 Matt diffuser direct/indirect diffuse distribution visually continuous - Variable position
SDGVL /1500	LED 5500 840	tw RAL 9016	ED	Selection

SDGVL /1500LED 5500 840tw RAL 9016ED

Modify article selection

Similar products

Accessories

CHARACTERISTICS
Category	Variable device mount
Type	SDGVL /1500 LED 5500 840 ET vw RAL 9016
Order number	18210404150
EAN number	4020863305124
Commodity code	94051190
Certification mark	IP 20, Protection class I, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE
Impact resistance (IK rating)	IK03 (10°C bis 40°C)
Ambient temperatur	ta 10°C to 40°C
Warranty period	5 years
State funding programs	BEG - Federal funding for efficient buildings (valid only for Germany)

ELECTRICAL ENGINEERING
Controller	Electronic driver (1 pcs.)
System output	34W
Mains voltage	230V/50Hz
Energy efficiency class/light source	B

LIGHTING TECHNOLOGY
Placement	LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance (MacAdam)	3SDCM
Photobiological safety (Luminaire)	RG1
Nominal luminous flux	5763lm
LED service life	50000h L80/B10 (Tq 40°C)
Luminaire luminous efficiency	168lm/W
Beam angle	115° (C0) / 105 ° (C90)
UGR lat./long.	25.9 / 27.1

MECHANICS
Housing colour	traffic white RAL 9016
Dimensions (LxWxH/DxH)	1531mm x 55mm x 43mm
Weight (net)	2.3kg
Type of installation	Mounting rail system installation

Downloads

Product datasheet Tender text Mounting instructions Product picture Project image Relux ROLFZ file EULUMDAT file IES file BIM RFA file Certificate Light run configurator

Light calculation

Tender text

SDT-Quick-fit mounting system, Variable device mount, Modullänge/1500. Device mount with two lateral lever locks, made of galvanised, profiled sheet steel; surface coated with polyester resin enamel; LED unit made of natural anodised extruded aluminium profile, in housing length for optically seamless light run, end faces made of plastic; can be positioned variably in light run. Housing colour traffic white RAL 9016; Light distribution direct as open distribution, matt LED diffuser cover made of polycarbonate. For optically seamless light run design. The light source and driver are removable in accordance with the EU 2019/2020 ecodesign requirements and can be replaced in the factory. Heat-resistant cables including connection cable 1 m and rapid installation plug connector with tool-less phase pre-selection and locating finger. They are exchangeable, permit modernisation and reliably prolong the service life of the overall system.

Dimensions (LxWxH/DxH): 1531mm x 55mm x 43mm
Beam angle: 115° (C0) / 105 ° (C90)
Placement: LED, Colour rendering/Light colour CRI ≥ 80 / 4000K
Colour tolerance: 3SDCM
Photobiological safety (Luminaire): RG1
LED service life: 50000h L80/B10 (Tq 40°C)
Nominal luminous flux: 5763lm
Luminaire luminous efficiency: 168lm/W
Controller: Electronic driver (1 pcs.)
System output: 34W
Energy efficiency class/light source: B
Mains voltage: 230V
Mains frequency: 50Hz
Impact resistance (IK rating): IK03 (10°C bis 40°C)
Ambient temperatur: ta 10°C to 40°C
UGR lat./long.: 25.9 / 27.1
Certification mark: IP20, Protection class I, F, HACCP DIN10500/Food/IFS-application-related suitability/BRC, Indoor, CE

Regiolux GmbH
Type: SDGVL /1500 LED 5500 840 ET vw RAL 9016
Article number: 18210404150
Product deep link: https://www.regiolux.de/en/article/18210404150
General warranty conditions: www.regiolux.de/en/Service/Warranty

Dimensional sketch

Cross-section | (Q)